Search results

Good truck at a good location. I'd know, I was after it too. :roll:

...

Yep, two not including the beaten to heck 1009 from a few auctions back. Both trucks ran says the auction so I hope they are solid units for their new owners. 1985 Chevrolet D30 4x4 US $6,700 Jan 7 2015 1986 Chevrolet D30 4x4 US $5,300 Dec 17 2014

If he did he paid top dollar for that 1008/1028. Running is a plus.

Yes, most of semi trailers have the 12v/24v lighting. Inside my M871 all the lights are 12v with a resistor step down on the 24v plug.

Doh! I knew I was forgetting a part on the list. :p

It's best to just have a spare junk truck. You'll have a 1 to 1 match for parts and they'll be in the exact same place so you can't lose them! :beer:

Spin-on fuel filter installed. Luckily since this truck came out of Hood late it was taken well care of.

That's what I had figured. Nothing like a fresh RRAD truck.

Found the issue as I suspected..and hope it wasn't. There were no parts or fragments present so this had to have been a known issue before DRMO turn in. Any ideas on repairing this? The broken "sleeve" can't be pulled directly out. Mods: Please move thread to 5 ton discussion.

I've pulled the tach and replaced the cable with one from Porkchop, both are new and working correctly. I was back tracking the issue and found the next problem part being that drive tip. Knowing the sensor isnt needed I dug up some old threads on here to see if it was possible to remove the...

I did the searching and did exactly that but no luck getting the tach to work. I'll play with it more tomorrow in the day light but this truck was picked over for odd parts.

Looking for a "Drive Tip" for my M931A1 w/ Cummins 250. It appears this part was robbed (along with other things I've now replaced) so my Tach doesn't work.

After many months of selling the LEDs I finally get to put them on my wrecker. I just need to find a replacement for the running lights and the swivel mounted floods then it will be 100% LED.

Yeah it's all a mess with that. At least you didn't end up at the airfield! :razz:

Glad you were able to get it. Helps when murphy is on holiday and the truck runs already. :p

Of the batch of wreckers that mine came from all of them had it. I just pulled up the A2s of that event and each one has a level winder but all were 2006 or newer rebuilds. It's been a long time since I've seen a wrecker without one to be honest but instillation may have been on the RRAD list.

Count me in if we can get them before things get hot outside again.

Yes they will fit. There are pros and cons to it of course, largest of which are loss in power but lower cruising rpms. http://www.steelsoldiers.com/showthread.php?83866-M923-925-on-16-00x20-tires

Verified.