Search results

Ok with the seat slid all the way back, from seat back to wheel 17", from seat up to bottom of wheel 5 5/8". The front set edge is 5" forward of the bottom of the steering wheel

It will work but it won't work right!

I took several pictures of this well known lowland hillbilly in Ohio and everyone of them came out looking like this. :?:

Those brackets were for the ground rods, sometimes they also have a bracket for the jerry can nozzles.

Gl has run out of Low #'s most auctions for non scrap jumped up to 100XX or above 6000, scrap or demil auctions are in the 8XXX which is also grater than 6000. It's confusing but a scrap/demill will have All scrap under this contract requires mutilation.

Diesel in the tank is safe. Us a tranny jack or floor jack with 2x2 piece of 3/4 plywood to support the tank as you unbolt and lower. I am sure there is someone around you with a multifuel that would take the liquid off your hands. Some of the older M101 have the same tank as an M37.

aua I was going to come up Friday, but found out today I have to work Saturday! Well there is always next year.

Jeff I have been wanting a set for over a year and those were just to close to pass. I'll be eating PBJ and oatmeal for awhile!

No one is answering Freight Dog's Question. I don't have an A3 but on the M35A2 and M818 they are on the cab side of the fire wall. They don't look anything like a civi circuit breaker. here's the pic's. They look more like a union for 2 wires, 1 is 15 amp, 2 is a 20.

Hopefully by this week end we will see it with bigger meats. Going out to Riley Thursday to pick these up. Not 16's but already mounted on 5T rims.

Ok I'll bite, whats with the names on the tanks? Buddies bike part Norton/Vincent yours Triumph/Norton. You sent me back to 73 when I had saved for a year while in the Navy to buy a MK2 Dunstall instead of a car. Wish I had never sold it.

I was planning on it but found out today I have to work Saturday.:evil:

GMC 302 6 cylinder gasser with auto trans

Talked to Linda Amos from GL , BTW one of the most helpful GL people ever. I walked up to the GL table and before I could say a word she had spotted Kansas on my name tag and wanted to know if I was having problems about the 15min clause at Ft Riley. She informed me it is the DRMO rule and...

Got home last night after a 12 hour drive. Had a great time seeing you guys for real and not just you avatar. Left here Tuesday with a full trailer and came home empty. Sorry I did not take more pictures. Going out to swbradley1 place Friday night was the high note of the trip. The Ohio...

maddawg308 Mike are you going to make the trip?? Dave

Allen Link got John's T. Both the frames we have had been buggered up so still looking for a straight frame. We will be at the MVPA in Dayton from Wed to Sunday am, Outside space 100 ask for Peter if you come by.

Be careful on what you wish for Gimpy!

If it still had the teletype set in it a couple of K, without $300 to 600.

It really doesn't say when for inside 8pm Wed for judged, If it is outside Outside vehicles in the display and vendor areas may be driven in and out daily, but must remain in place during show hours. No vehicle movement during show hours. Maybe one of the hosts can give us better info?