• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. porkysplace

    Flywheel plug?

    Plug missing in front of tranny on 923TM9-2320-272-10.pdf TM9-2320-272-10 Operations manual for the M939 series trucks. Sept 2004
  2. porkysplace

    How to Re-Attach Winch Hook to Cable

    Click on this link for cable dealers in your area. http://lmgtfy.com/?q=wire+rope+%26+cable+houston+texas
  3. porkysplace

    New to me Mystery Oshkosh

    Oshkosh never bought FWD Truck Corporation they were always two different companies . FWD's parent company was Corsta Corp and after about 1980 they only made fire trucks.
  4. porkysplace

    Mixing batteries? Mil & civi

    Keep in mind jump starting with junk batteries can fry the alternator 5 Ton Batteries conversion of 4 batteries to 2? New M923, battery issues. . .4 battery coversion to 2 batteries What civilian batteries to use?
  5. porkysplace

    Front Lock out Hubs

    Lockout hubs and sprag transfer case Suggestion for Locking Hubs
  6. porkysplace

    M35A2 water tanker Dog Bones

    A few helpfull threads ' Torque rod removal Torque rod bushing replacement Torque rod/dogbone mod and removal Edit : this covered in TM -9-2320-3361-34 section 10-8 TM9-2320-361-34.pdf TM9-2320-361-34 Direct Support and General Support Maintenance M35 Multifuel. (Later Edition TM)...
  7. porkysplace

    East coast to West coast trip - Free part taxi - standby assistance requested

    You probably should research the D.O.T regulations before altering the air system , unless your truck will used off-road only .
  8. porkysplace

    Hot Hub yeah looking for that

    Search of the OP's name then posted threads brought this up . Hot Hub Started by cleb, 02-25-2009 15:11
  9. porkysplace

    M35 A1 Transfer Case Question

    A 1975 should be a M35A2 you can figure out the year of manufacture of AM General trucks from this article by David Doyle using the frame V.I.N number. Deciphering the codes: Kaiser-Jeep and AM ... - Military Trader
  10. porkysplace

    1984 M1009 spindle

    Tire stuck how do you pull the locking hub unit out?
  11. porkysplace

    M35A3 No Electrical for Start

    M35a3 wiring guru needed Post #2 of the thread above has a wiring diagram , below is a link to the TM's TM's for the Deuce
  12. porkysplace

    How to find a part (educational--I hope)

    It has been a few years since this thread was posted , but it has good information .
  13. porkysplace

    Front brakes part numbers M1008

    This is a good thread on find part numbers . How to find a part (educational--I hope)
  14. porkysplace

    Starter Clicking, not turning the engine over.

    Bad batteries . starter clicking rapidly
  15. porkysplace

    M929A1 Belt question

    Simply typing " M939 axle boot " into the search box at the top right corner of every page bought this thread up as the first thread. M939 Front Axle Boot replacement.....how I did it..... The belt numbers are in the 5 ton stickies.
  16. porkysplace

    M1031 down. Need a part.

    TM9-2320-289-20P.pdf TM9-2320-289-20P Unit maintenance and depot maintenance parts and special tool lists for CUCV TM9-2320-289-34p.pdf TM9-2320-289-34P Direct support and general support maintenance repair parts and special tools lists.
  17. porkysplace

    M1031 down. Need a part.

    Different transfer cases also doesn't the M1008 have a NP208 and the M1031 have NP205 for the PTO.
  18. porkysplace

    Help moving M818 from Torrington CT 18 miles to Woodbury CT

    If you pull the axles and front caps to flat tow it the only thing you have to worry about failing is the wheel bearings. The wheel bearings and brakes need to be torn down repaired/replace before being put on the road safely any how . There is no way to consider trusting hydraulic brakes that...
  19. porkysplace

    Help moving M818 from Torrington CT 18 miles to Woodbury CT

    Having it prepped to tow would reduce costs also axles pulled (easier than driveshafts ) brakes freed up ect. But $2000 for the truck $1200 to tow it = $3200 he should be able to find a running driving truck for a few hundred more.
  20. porkysplace

    M923A2 Doing 80 MPH!!

    Anybody ever consider this is why insurance companies refuse to insure MV's , you really can't blame them with idiots like this.
Top