Search results

FIXED! Clinto PM'd me and tweaked it. Thanks Clint. I used to look at the PM mag stuff all the time. IIRC, there was a little pop-up on the side of the screen in the old site that had random pics of them..knida like the random photos we have now. Would it be possible to put a tab under the...

The pumps have different P/Ns so i'm sure there is something internally that is different. Maybe the metering valve or the cam that makes the pressure. I have a manual, I should compare the two.

Should be at Stoddard again.

Well, the 106 is almost done. It has a fresh coat of paint, the cooling system is all cleaned up, I just gotta get the fan drive pulley made..can't locate one. We moved it out of the shop area back into it's parking place, we can do the numbering where it sits and do the pulley/belts there too...

WOO HOO! Mike, I hope you can!

So that means we can't upload things for the time being? I have a tire manual and a few others I'd like to put up.

Man, I searched everywhere...guess just not there! PM sent clinto. Thanks for all the replies.

I agree, the 16 thru 18 is good fer me. Early? Maybe. If we are still on work share, maybe I can arrange it. If not, it will be Friday afternoon for me. Jake should have his license by then. Maybe I'll get lazy and bring the trailer...wait, that would be more work...the tent will do nicely...

Is there a list of current moderators? I need some help with the calender section. I think it would be a good idea to have a list of who is who on the front page.

Hey Chris, I shoulda told ya that the seal goes in the front cover while it is on the bench. It is centered on the crank when you install the cover. Keep an eye on the front, you have a better than 50% chance it is gonna leak :oops: What Vid?

http://www.arsco.com/catalog/pg38misc.htm

My junk does that in cold...well Ca cold, maybe 35 degrees. Other than that, fires right up w/o throttle. What is the idle set at? Should be around 800.

855 or 8.3L?

Mr Waller, Thanks! I just visited the site and sent off an e-mail.

Hole, i'm glad you posted the date because I was gonna do my usual..post the WRONG date! The weekend of the 16-18 is correct...geez, i'm glad I didn't do that again! We might need to finger out a different place to do a range clean up this time. I understand there are a few places north of 40...

Hey guys, I looked thru 10 pages of threads for results of HMMWV fuel filter, but came up with nada. The Museum has an early M998. The fuel filter is used up. The numbers are SC220072. It is a Kaydon filter and I have exhausted all of my resources at work and the internet. NOPE.com! Does anyone...

You can get flywheel housings for just about any bell housing/trans. The flywheel/clutch will be the larger issue. You can also get different starter quadrants too.

You guys have rednecks too? :-D

The thing that stands out is "normal cranking time for his truck, with WOT" . Sounds like a fuel pump. If you have done all the filters, i'd bet that's the issue.

Don't waste the $. If the cylinder has low compression, there will be white smoke all the time and lots of blow-by...that can ONLY be measured with a manometer and compared to a reading from the MFG of the engine...if ANYONE has the specs and measurement procedures for the multi, POST UP! The...