Search results

That would make me an awesome parade float trailer.

Buy it!

Facebook: Military trailers There are a few members there that list them.

http://www.mytarp.com/They make custom covers to size and style.I had a low one made for mine four years old and still looks good.Travis and the crew make great products.

Tire pressure will solve the bouncing problem. try until you stop the bounce. The axles are DEXTER so they may have a replacement backing plate that has an electric brake systenm to work with the current drums. As for rust... Most or it is aluminum. What is rusting?

Looks good!

They will fit. I run them on my 2002 GMC 2500hd as winter wheels. The center bore is tighter to the hub and I grease it well so I can get them off in the spring. The scalloped center rust welds to the hub with the snow salt in Pittsburgh. I run the five spoke GM wheels on the trailer and they...

The nose mount is the same, they interchange. Of just weld up a adjustible channel like I did.

H2 will fit! 8 on 6.5 lug pattern same running gear as a 2500HD The hub may stick out farther and not be able to use the center caps.

x2

This guy on mud went with a drop axle on his M105. A little lighter axle than you want but the form and function worked well. http://forum.ih8mud.com/trailer-tech/212556-m105-utility-trailer.html

Are you changing out the aftermarket wheels for some steel ones?

Your truck has cleaned up well. I have a civy 2002 2500HD Crew and love it. Same grey vinyl interior with rubber floor " no gun mount " 1. Keep the window regulators greased with good waterproof grease. 2. once a month spray the window rubber with silicone or clear lube to ease operation. "...

http://www.steelsoldiers.com/showthread.php?105032-M1101-wheel-bearing-seal-part-numbers

http://www.stocktonwheel.com/index.html

Unbolt the surge lunette assembly. 4 bolts from the top Then grind the nose of the V flat and weld on the adjustable channel. remove the 4 rear small bolts and the long nose bolt. If you use the original safety chains they need to be spaced out to clear the adjustable channel. Sell the surge...

I went with the weld on ring mount. Pull the pin and rotate it up or pull the pin and remove it.

After taking the surge lunette off there was no ill effect except a lighter tongue about 50 pounds less My brakes did not work. I should have kept the hand brakes they would have been handy. but I wanted to lose the weight. The drums are very heavy too. I tow with my 2002GMC 2500HD crew can and...

Ebay is my favorite store. Just search for trailer safety cables. If you remove the long nose bolt on the front to remove the chain mounts replace them with two short bolts from each side. The long nose bolt is straight across the two shorter bolts will sit flat in the channel when you remove...

I removed my safety chains and replaced them with safety cables. I like them better, snap hooks and they recoil back when not in use. My 101A2 build: http://www.steelsoldiers.com/showthread.php?82301-Rebuilding-MY-m101a2-BY-harleyhouse&highlight=