Search results

Thanks, motivation and weather was what took so long lol

So is there a thread with how to repair the S3 or the EES boxes,I have one of each both keep the solonoid on unless I shut off the switch, nothing appears damaged inside either box and I have no signs of water intrusion in the boxes, batteries are charged, even tried a new tsu since cheap

are these still available ad how has it held up

I found this for 10xx series turret support pic on an actual turret would be nice Also pic of cre box on 11xx turret support

mounting the crew boxes on a 10 series turret and 11 series turret , i dont want to use the rhino mounts , I want to use the mounts that look like a piece of angle i have A hybrid turret support that I built , fits a 10 series turret in 11 series truck, check it out in the hot rodding section...

should i have posted in the radio section?

So all done jambs are made b pillar covers made,all removable all 1/8" steel,so that's how u put the m1114 roof on a 998 lol

hi all need pics of vic 1 mounted in slant with turret or manual that shows it , pics of he munts helps too

Supports on roofs on new bearing seal

Supports finished lock ring and bearing with lock all prefit, hopefully paints dry tommorow and we get it reinstall on the truck last time

Fab is finished, need to make sure the bearings centered and drill holes for it then clean prime paint and mount the last time

Rear legs gabbed for turret support

Front legs are made and welded in

Work started on turret support, new m1114 b pillar tubes and blocks, using 1/4" aluminum to fab a support for 10xx series style turret and 1114 style vehicle support

well we did do the local memorial day parade and took her to put out flags on graves with the vfw and my sons BSA troop the project has been put on a side burner while i do other more pressing things, BUT I have the turrett bearing support drawn up and have the aluminum sitting here to build...

M1114 center c pillar tube is finished, on the the turret support

M1114 center c pillar finished

Got these on today, 3m tape was nfg so used boat adhesive, the armored grille sides need washers behind them to take up gap And you need to cut out a spot the armor grille side panels as shown to allow for clearance Wipe the hood and panel with laquer thinner first, hoods rigid now, also...

To cut down and reweld the roof and fabricate the extra 3 mounts I'm confident that a motivated experienced person can get to the point I am in 2 days 3 tops if your moving slow, I recently had hand surgery so I'm dragging my feet and working on it here and there, second side obviously way...

Fully bolted down and welded,next is making the upper jamb Yes the snorkel intake bracket still fits, it touches a tad so I may mark it and touch with a grinder when I take the roof