Search results

Did you use rebuild kits with the cup expanders ?

TM's for the 939 series trucks There are also some updated versions in the 5 ton section of the technical manuals section , which can be accessed by clicking on "technical Manuals" in the center of the top toolbar of every page.

It might not hurt to clean the grounds.

The only thing on the CUCV's that's 24v is the starting system the rest of the truck is 12v.

If you haven't already download and saved to your computer the technical manuals you should do so . TM's for the Deuce

The -24P tm should have a diagram of the hub that shows the CTIS parts . The TM section for changing a tire will also list any specialty tools needed.

Keep in mind the federal DOT dosen't have any regulstions on wheel spacers but some states do not allow them . It is a good idea to check the state laws for the state you plan on using them in.

Nothing new for GL. GL lots being pulled Vanishing Auction? Pulled lot searching, then the auction is on, and I can't find the items now. CUCVs pulled from GL...

If you have a Parker Hose dealer near you they should have them or can get them .

Elbow fittings, you will find a parts breakdown in the TM 9-2320-361 -34P section II Figure 30. Fuel Filters and Related Parts. TM's for the Deuce

Welcome , it's also a good idea to download the -10 TM and read it . TM9-2320-209-10-1.pdf

You need to start with downloading the technical manuals TM's for the 939 series trucks there also updated ones here 5-ton and up TMs

Any one running hmmwv tires on there m1008 HMMWV rims and M1008 ?? HMMWV tires (yes, I did search) Hmmwv beadlocks on m1008 37" Hummer Tires & Wheels on M1008 Running Hmmwv wheels question Best lift for a 86 CUCV so I can fit 37" Humvee tires I feed cows with M1008 Wheel/Tire upgrade...

It shouldn't be too hard to title here in mi , I'll send you a PM.

Off-road flatbed trailer with singles

The troubleshooting section of the Tecnical Manuals .

Two threads related to your question ; 1. Brake fluid -how to tell which kind you have DOT 3 or DOT 5 how to determine which brake fluid you have . 2.Deuce Power Bleeder R4x4 Style step by step on how to build a power bleeder.

Hopefully you plan on parking the truck until the brake fluid leak is fixed. The leak may be in the air-pac / master cylinder with the sounds you describe .

It is listed in the TM's for a stock deuce. You should get the seller measure the truck your buying . Tire size , with or without rear cover , modifactions are all factors .

A daily pre-trip inspection go's a long way . Hopefully you have checked the brake fluid.