Search results

Yes, Lunette, lines and all brake hardware removed. No problem stopping it with my 2500HD. It rides very nice too.

Nice work, Does it clear the frame?

My 101A2 weighs in at 1080 I removed the brake system.

I mounted a D handle shovel inside on the wheel tub. I used a pair of Quick-Fist clamps. Sutton Outfitters My build

A buyer: Wanted: Military trailer M101 "A1" Lunette eye and monting plate. - Expedition Portal

Very nice ,How much did it cost?

My vote is across the front of the tub. use the ribs as mounting points use a stud with large wing nut to secure it. Show us pictures when done.

Open or closed the gate still would do the same with air resistance. Flat open would have been better. Congradulations on a safe pick up. What are your plans now?

Rip the brake system off and loose 400 pounds or more. Contact R and P trailer on ebay and order an axle that has the same bolt pattern as the tow vehicle one with electric brakes and a 7 pin civilian plug. Then you will be lighter, No need to carry a seperate spare, and others can use it too...

A custom M105 from a Zip Line tour. custom roll cage, seats, frame, and tires.

AWesome fab work! Keep us posted.

The cover sits flat on the bows. The first picture is with the rope tie down, and the last two are with Bungee. Life is better with Bungee! " pulls tight on the tub.

I used 3/4" pine cut to sit flat across the tub and as wide as the pockets. I used the table saw to cut a kerf to let the board sit into the pocket. They work for now,

This is the plan for my camp kitchen. OffRoad Trailer - Two Minute Kitchen - YouTube

Hank: Great build Love the work, and the photos to keep us up to date. Can't wait to see the finished result.

I bought a Triton propane heater from ebay Camp Chef HWD5 Hot Water Heater / Portable Shower - hwd5cc Fully adjustable heat and water flow. Adjustable shower Head. 72-inches shower hose.13500 BTU per gas side burnerIncludes hose and regulator for 20-pound bulk propane tank (not included)...

New water tank installed. I bought a 30 gallon RV tank off the bay and a HF 12 volt pump. I welded up a cradle to house the tank and pump as a unit " remove when I need to haul stuff" anf the hose bib mounted on the side is supplied by a stainless steel braided faucet supply line. The ball...

I would build a triangulated tongue that has a straight pivot to the frame. not the front eye hanger, and make it a true dump.

Measure the tub length and width and I added 1" make sure to measure the tailgate latches too. then decide how long you want the side skirts to be. I believe mine are 5" but I will check. For bungee I bought a 50' roll of 3/8" of ebay and bungee hooks for the end. I had 3' extra. call my tarp...

I went with one from here: Machine Covers - Five-Sided Snug-Fitting Tarps less than $100.00 shipped and It fits great. I changed out the rope to bungee and it works better. Easy on and off. If one on the truck toneau companies were smart they would offer a snap cover with a frame for the...