Search results

From what I have read only the starter is 24v

Got mine from NAPA its a napa gold I believe #1061, counter person did ot have a problem getting it , I tell them its a 1986 K30 j code diesel.

I remember someone doing this inverted and he put wooden stakes in the pockets to keep them from moving.

I broke the nose on my starter yesterday, the engine seemed to kick when it broke only the second time it kicked in the time i have had it. I'm going to order a gear reduction starter and have the direct rebuilt for a spare. No shims and have already replaced the flexplate as it had broken bolts...

I don't know what it looks like, but if your local outdoor power equipment dealer is a good guy he might have something that he can match up, power eq has springs for everything.

the hardest one to access when I did mine was the pass rear, I reached thru the wheel well with about a 24'' extension all the others were uneventfull.

I would think you will need a new block/engine. If you could find the old piece a real good engine shop could weld it and retap it.

Most good marine stores will have the cable clamp that you are looking for.

I'm thinking AM/FM CD. I used to put an 8 track in my Deuce at summercamp with the Guards and play Jimmie Hendrix's version of the Star Spangled Banner . would tie into the first battery.

torque converter holds 5 and trans about 4

If its not there then it broke apart and was blown out the exhaust, not much you can do.

Always remember to raise landing gear before leaving the motor pool. Nice trailer.

Napa # is either 904711 or 1-7499 both #'s are on the box. The bolt as I remember is either 1/4 0r 5/16 course thread about 1" long should do it.

should be able to fab one out of 1/4 in flat stock ,notch one end to fit modulator and drill a hole as required.

I would think a junk yard or dealer. should be about the same on most GM trucks of same vintage

I got mine at Napa. Parts guy had no problem finding it, I might still have the # at work, i.ll check tomorrow, did not come with bracket

mine had the cooling lines disconnected.they are on the passanger side I don't remember any connections on the drivers side excet the shift lever.

www.rustrepair and www.raybuck has corners for $12 and $20.00

Member A-line was parting out a few, 2 months ago,

Trash, Not even worth commenting on.