Search results

deleted

deleted

The faster the fluid goes thru the pipe the faster the air gets sucked in................... Found a lot of then right at the NPT threads on things (3/4" per foot taper) as that actually only seal on one thread at about 500° of the minor diameter.

a multifuel does not have liners but a LDS does?

The Deuce TM lists its wheel nuts in the expendables that are to be tossed and put new ones on wheel change. I know I did read that in the TM somewhere. I found the Deuce just had its nuts put back on, looked like without even cleaning or any 30# oil on them. They must have use a one inch impact...

All Ford Expeditions were on call back to change the lugnuts (all RH). They changed the angle of the nuts where they seat and made specific torque of 104 lbs for tightening. Some folks wheels got loose and one or two fell off after changing to a spare. Hey, We full of totally useless...

left hand one side right hand other side ..... and fasteners don't get complicated, they just get interesting. The original P-38 fighter plane designed with rotating props different rotation each side was changed to rotating the opposite by swapping the engines but they didn't change the...

anyhow not many understand suspension on a Model T or an oilfield Dodge.

Hey, I still trying to find the patent for LH lugnuts, Where are you going?

Yes it does and How many Dodge trucks went to war beginning 1916? It is a Dodge invention? Chrysler products began using left handed threads in the late 1930's and phased out their use during the 1971 model year. Mopars for many years and tossing the left hand threads was one of first thing I...

Put the little generator where the spare was and put the spare up by the cab in the bed

Has to be greased for longevity and for normal operation At first I just thought that they sold you the cable itself whereas one removes the old broke cable and installs the new cable in the old sleeve, like a 65 Plymouth Valiant. Your photo does not show that.

Left side left handed thread stuff on wheel is an Dodge thing from the old days. To get lugs off always turn the top of the wrench extension to the back of the truck, no matter which side of truck you be on. Do I got that part correct? https://www.youtube.com/watch?v=wF578K91Ino

How many gaskets are there between supply point and the goeintahs? You have what I named a "venturi leak" Means that the more the liquid flows then the more intrusion of air. Common extremely hard to find problem in power plants that move every kind of fluid every which way. But it got figured...

DO NOT yank out the fuel "engine stop" handle as if it is just a shut down lever. Just pull it out median fast speed and listen to Her or even pull that handle out SLOW and listen. This ain't no toyota. There is many things happening in the engine controls that will cause a loose button. Does...

One must take it apart and inspect the workings of it all. Never know what one may find. Your truck, now You have to work. Not a problem. When fixed it will stay fixed.

\

You just gonnah have to jack it up and inspect all the brake internals and fix it if is is worn or wasted or otherwise not as design. You got the truck so labor is cheap, your labor. Parts for that are not expensive. Something like 1400 reverse HP dissipating the heat........ The brakes on...

Every figure that has part call out numbers on it will have probably the next page giving all the information about each part. All the -P TM's are like that. Are you trying to read TM's on a telephone?

penta https://www.steelsoldiers.com/showthread.php?24529-Hummer-12-bolt-beadlock/page2 brilliant