Search results

There is a truck pull coming up in a month or so. I did real well a few years ago with my m931a2. I was going to try the m1078 this year. I like the pushbutton low range I don't know how it compares to the gearing on my old trucks low range. I know I only have the one low gear.

I have new in the crate tan sets for the m1083 5 ton lmtv trucks

The temp sender is on the engine above the alternator make sure its plugged in tight and zip tie up the wire going to it.

Maybe you can find some type of adapter at the local plumbing supply house.

UPS or freight. FedEx ground and the post office have a 70lb limit. Take it out of the crate wrap it in heavy cardboard. You will save a bunch of weight. If you can take it apart and do 2 boxes sometimes it's cheaper and easier.

I have a 20k lumen JW Speaker 623 narrow flood and 2 whelen 6k scene lights I am planning on mounting the Speaker light centered on the truck front between the windshield and grille and the 2 scene lights one on each side.

Check the fluid level with the trans warm, running in neutral.

Motor oil same as engine. You can switch to allison dex iii. I left oil in mine though.

Sorry to hear about the trans damage I saw that listing and there was def no indication of that type of damage.

Did the wheels bolt up without modification? Post pics of the wheel section too.

Put the old ones back on.

Surplus retail but not new manufacturer prices.

Thats me

Mine is reg antique. I have another one that qualifies for antique reg in ct M1078. Will

Hella makes 7 inch round H4 housings you can use a variety of H4 bulbs with them. I have run higher wattage off-road use bulbs with good results. Don't get the cheapie housings they suck pay the few bucks more for the original Hellas. They can be found discounted online. You will need a pair of...

I am fine at 55 in mine. No earplugs needed. Front gladhands need to breathe or your brakes may not want to release. There is a vent on each cover for that reason. Check fluids and lights.

What do you need to troubleshoot? What are your symptoms?

The 3116 is all mechanical and will start with air fuel and power. You can jump the starter solenoid with a screwdriver without tilting the cab. The trans selector is a different story and you wont go anywhere unless its functioning. There is a vim module in the passenger side underdash with 6...

I was at full rev around 2200rpms with the pedal down in low range I didnt have any issues with my tq converter. I want to try the M1078 this year.

There are little plastic tabs that hold the wires with basically spade connectors in place in the power panel. It's spaghetti in there.