Search results

That does not jive with the documentation I gave you.

Can you tell me what page the voltage is listed on, I can't find it at first glance.

How many ohms does the speed sensor test to (disconnected)? are you using AC or DC scales, you do not have a code 71 so I am curious why you are looking at it.

But the tilt adapter is not mounted under the spring, yes? Those pictures look like there is a riser under the spring, probably to put the radiating element farther out of reach.

Careful inspection may reveal the moved the pre cups, that would explain why the injector angles are different. (along with possible other improvements to combustion) The 6.5L has a larger bore, this means the fire ring would land in a different place on the pre cups, it may work just fine but I...

I saw those pictures, looks like a "protected" spring,,,, AHH, so it is just a protection boot for the spring? What is under the bottom part of the boot? an extension for the base?

Double check, I don't think they are the same, the listings I looked at only stated 92-2000 6.5L

I am a little confused, what does RPM have to do with the TPS? So wire 350C, terminal A has 5v measured to ground? and wire 350H terminal C measures near zero OHMs to ground? And you have no voltage on wire 350B terminal B to ground? All this is measured with the plug connected to the TPS...

I was looking at a Harris antenna, for the most part looks interchangeable with the Shakespeare HF antenna but for this thing, I assume it is a loading coil? will it fit the Shakespeare antenna?

Use new nuts and bolts, I started the top right bolt from the front before installing the pipe and made sure to align it as the pipe went in, then get it in a little bind so starting the nut is easier, the rest are a piece of cake compared to the top right one. All the fasteners are nut/bolt...

Pretty sure Yes, same pipe

Looks like a much less effective run flat and does not look like it offers much in the way of bead lock ether.

Dang thing is built on a civy chassis, looks like a few well placed rounds between the tire and fender would end things pretty quick but I guess the same could be said about even an up armored HMMWV. I guess crew survival is the most important thing, one cool thing is high voltage contacts at...

At just south of 300K an interesting "toy"

That is what they looked like to me, a whole bunch of fake bolts I wonder how they got run flats in them? They are also supposed to protect the brakes from small arms fire, I would guess any thick aluminum wheels could claim that.

This 20" wheel with a 37" tire has run flats, I wonder if it is actually a two piece wheel? Looks like a Rhino wheel.

According to the video it would not be running. The truck in the first post sold for $27,500 PLUS the 13% fee this weekend, that's over 31K o_O

EUC wait exactly 14 days, not the first one. I noticed they changed the SF97 procedure since the last time, I was able to correct that they called it a 2 door and was able to fill out curb and max weight body style etc. much better. They told me the SF97 is not submitted until the truck is...

The rear one is a 1/4 turn Dzus fitting and the front screws are 12 point (IIRC), I don't remember the size but they are U.S. that panel is screwed to the threaded holes where the rear door hinges will go.

Welcome to the forum guys!! Make sure to post plenty of pictures.