Search results

YOur fuel pump is bad, I had this same issue on a truck. The injector pump was drawing from the fuel tank, not the pump. when you opened the water separator drain, you lost suction. This happened to me on a hmmwv while on duty and was During a joint inspection, the army showed up with full fuel...

there are many flavors of Amtech tops...I've seen those doors, even close out panels to remove the boxes

iirc it's the servo advance plunger....either way, pump has to come out.

Do a google search, there are numerous ways to accomplish this, it's been done for years. Another method is using another water crossover on the rear of the head, there are several water crossovers for these motors based on years. EGT's are more prevalent in turbo's....that's a different topic...

:deadhorse:

Rear cooling kits are nothing new, these are already for sale from other aftermarket Hummer dealers as well as Diesel suppliers. It's nothing new to take the 2 rear water Jacket plates and drill and tap them, install small cooling lines tied into the rest of the cooling system. You will need to...

Yep....

What Lawdog says is correct..that FONT is not correct for that stamping and that is not where the mfg'ing ID gets stamped....it gets stamped on the lower sill, no visible when the hood is closed. someone stamped it to make it pass the VIN verification, the vin Ver form asks for 2...

They are the same

I've been waiting over 3 months for my SF97 on a stakebed truck....rediculous

cold advance does not work that way...it advances the timing. Do what I said above, disconnect the accelerator cable at the pump.

GP was selling M998's with 2004 data plates, they were re stamped when they went through reset. i get trucks from GP constantly that have mods that don't merry up with the year of mfg on the data plate, for example, the location of the seat belt mounting location on the tunnel, the 85-8? Had the...

This entire thread has turned into a rehash of everyone's prior statements.

Look, what none of us know is what deal the DLA made with GP on the stamping...is the stamp legal? Based on the form, it say it's void if modified, must be machine prepared. I had a DMV rep tell me this exact thing. What if I stamped X's over it? That would void it just like a stamp that can't...

the number of years it's been titled....I have them titled from 2001.

I just did this on my truck...riv nuts, if you have fording kit, the air cleaner has to come off...but I always add the fording elbow if I can and get rid of the army style pre cleaner and add the Close out rubber on the dirt discharge vent...removing the duck bill.

That pad requires the heater comes out, cut the old pad out.

yes, that's the culprit...but now, what caused it? That's the million dollar question. Did you have a brand new in the box S3? Or a supposed new one off ebay? If it were me? I would do a new box and engine harness, but that's me not wanting to spend another small fortune on a 3rd box...

that bracing is gone on 94 on up model year Hummer's....allowed for more leg room. It's very well in the 92-93 that still had the B-beam.

I have owned a Hummer H1 since 2000, a98 to be exact, I have worked on in my shop every year mfg'd. The 92 and 93 are closest to a hmmwv in almost every respect. Safety items are tail lights are reflective, Hmmwv's are not, nothing different on side impact that I have ever seen, in fact, they...