Search results

Looks OK but looks can be deceiving. Plastigage it to make sure clearances are in spec.

Great idea, one which I have personally tossed around for quite a while. There are huge numbers of new HMMWV owners that do not have the ability to properly fix/upgrade their trucks, just look at the upcharge people are willing to pay to "Plan B" for a fixed/upgraded truck. My personal...

Verify the part numbers on the sending unit, mismatched senders/gauges can read all wrong like you are seeing.

I keep using the 50 year old coils and keep a stash of spares.

So the "Lexus Advanced Pre-Collision System" failed miserably. Big surprise. Glad you are OK.

The way the switch works is that depending on what the setting is, the switch directs power to that circuit. Those switches are not usually repairable. There is also a circuit breaker built in to the switch. If you are certain that power is being fed to the switch and no power is coming out...

I'm in for a dash mount. Great research on the source.

All sounds normal.

Seems like 3/4, 9/16 and 1/2 are 90% of the sizes on these trucks.

Very likely the problem. I have repaired 2 LMTVs that had out of phase driveshafts. It's easy to miss unless you look for it. Sets up brutal torsional vibrations in the driveline depending on how far out of phase they are.

Looks like that one has the roof raised up somehow. Dept of Energy did that kind of thing at the Nevada test sites.

Cutting giant holes in the B pillar makes it useless as rollover protection. And 911 is spot on about the backing plates, if you roll they will tear the nicest square hole in the thin aluminum. I would be embarrassed to show that "design"/workmanship. But they did prove the stock HMMWV is...

DMV does not care about the M designation. If the frame VIN does not match the title, you can retitle the truck via bonded title. If the frame number matches the title but the dash plate is wrong, contact Vintage Power Wagons for a blank plate.

I would run the engine with the cab tilted to see why you are getting severe vibration on the engine.

My LMTV had a lot of visible blowby until I changed the oil, then it went away.

Way too high. $2.00/mile for 1/2 a step deck is more like it. Call Joey at United States of Freight. Truckers love to come to Houston because getting a load out of here is like taking candy from a baby.

Ohm out the solenoid at the transmission Deutch connector, the ohm value is different than at the controller.

Yours took too many blue pills and mine needs some.

Guys I'm at ground zero of this and gas is $2.10 and Wal Mart, Home Depot etc is fully stocked.

Exhaust open to the rain=piece of crap.