• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Keith Knight

    Keith's M1078A1 Project Overland

    This where I ran all of the electrical through the hull using Deutsch connectors. I made all the water and electrical connections to the habitat with connections that could quickly disconnect in order to remove the habitat from the frame if I need to service something. Basically I could have...
  2. Keith Knight

    Keith's M1078A1 Project Overland

    Espar heater/furnace installation. Through hull glycol pass through. rain shield covering the Espar furnace. The water heat exchanger and the space heater both using the heated glycol as the heat source.
  3. Keith Knight

    Keith's M1078A1 Project Overland

    Next is to start pulling wires.
  4. Keith Knight

    Air conditioner install using Waterloo parts

    Looking good.
  5. Keith Knight

    Keith's M1078A1 Project Overland

    Thanks, yes I custom made it.
  6. Keith Knight

    Keith's M1078A1 Project Overland

    So it’s been way to long for an up date, sorry about that other things tend to come first. The shower and wet bathroom. That’s a small/tiny sink on the right. The sink will get a granite top then the faucet. The small handle is for a hand towel. Also we will be putting granite on top of the...
  7. Keith Knight

    step replacement options

    Also just looked at the specs and the narrow one is 18” wide which could possibly be modified but in the stowed position it’s 6” tall which becomes in the danger zone.
  8. Keith Knight

    step replacement options

    I tested the amp research bed step and in my opinion in the stowed position it still hung down to far. I like the single Thule electric step but is it available in the us?
  9. Keith Knight

    step replacement options

    😂 I’m only 5’5.5” tall so should I get my feelings hurt!
  10. Keith Knight

    step replacement options

    I agree with you the problem with the cable or chain is it’s a ladder and when exiting it’s always difficult finding that bottom step because it’s hiding under the box. This design would put the step in a visible more natural area. I’ve added a few extra things on my vehicle that requires air...
  11. Keith Knight

    step replacement options

    I stared a couple years ago engineering and fabrication of electric steps that come down when the door opens but have shelved that idea for a simpler stronger idea. Here is a quick sketch of my thoughts. Very simple and strong. Yes its terrible have to remember to lift it out of the way but I...
  12. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    I’m guessing because it had a high mixture of original engine oil and ATF and it didn’t like like.
  13. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    That’s great for the A0 trucks but not so good for the A1 trucks.
  14. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    There is a lot but they probably only drained the transfer case.
  15. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    here is the transmission drain plug location.
  16. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    One is on the transfer case and one is on the transmission even though they share fluids.
  17. Keith Knight

    LMTV M1078 Transmission oil confusion...please help!

    “Alert” there are Two drain plugs!!! Don’t make my mistake, my LMTV also came drained of fluids they also felt it necessary to throw the drain plugs away. Any how I decided to change from motor oil to ATF not knowing there are two drain plugs and I filled mine with ATF and it drove great for...
  18. Keith Knight

    Hard to find Steyr / FMTV parts

    Do they ship to USA?
  19. Keith Knight

    Aluminum wheels

    Here are the lug nuts for these Aluminum wheels.
  20. Keith Knight

    New Dash Layout in the works……

    Looks good!
Top