Search results

Did a test today : 2ea. rt-1523's......one with ext. speaker, other with Racal hooked up direct with bailout cord. When headset momentary switch pushed, a click tone is herd on the other radio's ext speaker, but no voice. Tried this with 3 different Racals, and 4 different bailout cords....all...

Ok...I have a few of those.

You need a CX-13313 Vic interface cable along with the cx-13300 to work. I have spare cx-13313's

Wrong....I sent you a 12480922 sender which directly screws into a 12339963 T/C adapter [ both shown in photo ] The 90 deg. adapter is removed from the 12339963 and the sender takes its place.

There's only one type on a hmmwv, and you have to remove the 90 deg. adapter and put sender in where 90 deg. adapt. was. Also there are 2 ea. Y harnesses needed along with the main harness.

Maybe in a few years the junkers will sell cheap.... BUT WAIT...buy one get second one free, with separate handling charge....

If this was in the wanted ad section....would be a different response.

Victor is a good gasket

I have one, but I need the upper section.

If its a A0 / A1 truck without park position...its a 3L80 [ 400 turbo trans ]. If its a M11xx or A2 truck...its a 4L80 E.

Not if it starts fine cold.

I may have them...parts.

Nice box. Can probably make something similar. One thing ....if you disconnect it , the contacts will still be hot.

Take out the screws on at least 2 to 3 of the last clamps , wire should go aft more.

The late style M1151 turret can fit in multiple mount systems. These pics show it on a M900 series plate...direct bolt on. It is also a direct bolt on in all early M102x, 104x series tops. Also fits the M11xx series aluminum roofs with roof adapter in last photo. Some available

I have new 6.5NA heads available @ 250 ea.

Transmission and T/C have studs and use 3/8-24 nuts.

Part numbers on bag are correct per the latest TM9-2320-387-24p fig 166A, # 22 RH: 2540-01-119-4900, pn 29-300-U-L LH: 2540-01-119-5317, pn 9-300-U-R They are backwards in TM9-2320-280-24p

The original Hmmwv tachs don't have lighting. The dog house one has tape over the light hole. The upper W/S one has no way to light it from the inside. I have sockets available for the dog house type with buss bar mount. Bulb is a CM1864...28v

M1152, Also truck with an Avenger roof. If the area around cab is armored...normally they use the short door with plate.