Search results

Nice ! Welcome from CNY.

Why introduce a new potential leak point? Its really easy to use a $5 gladhand on the rear port. No need to get under to an air tank or any other junk, literally takes 5 seconds to connect.

Hello, I am wheelspinner, and I would like to see breakfast exactly as it was last year, with the exception of having grits everyday. Popop's grits are amazing and I can't wait for them. Lunch, was OK, its hard to plan who will be around and who will not. Box lunches seem to work just fine...

Matt, #1 BRING THE JEEP!! That thing is beautiful. #2 What day are you all planning for a convoy?

After almost 21 months it finally is weather tight again. Had a local glass shop come out and install the windshield and two topper windows for CHEAP!

Adam you can always pick up that one I showed you for a beater ........

Double check the PCB ground. It finds ground through the lower outside corner stud. If the paint is not clean off of all four surfaces ( the spacer, the box and the truck ) it will cause problems.

I saw one at Findlay this year. Looked perfect.

Took a ride out to Doghead's for a little shakedown. About 55 miles each way. No problems ran perfect. Very happy. Even got DH to drive me around Lake Ontario for a while. All in all a very good day. Also thanks to DH I have the new air pressure gauge I needed.

Control "F" is your friend

Weighs? or GVWR which is what it is rated to carry. 31.5K is the GVWR

Now that I have run it, I had a problem with the 150 psi safety valve popping off, but the gauge only indicating 70 psi. Seemed like an easy fix, the safety valve must be bad. I had another one so I swapped it out quick, and......that wasn't it. So I picked up a new air governor, that was the...

By them giving "a little" to the Fire Dept this will eliminate the biggest ally that the collector hobby would have had. Once they are made happy that whole argument gets removed. Giving a little with no title transfer is about the worst possible update that us collectors and hobbyists could...

It's really pretty easy. There is a thread about mis plumbed lines at the block where three air lines come together. My truck was plumbed wrong and it was a 10 minute fix. Hard to see. Use your phone to take a picture of the face of the block so you can see which is "a" "b" and "c". Then just...

Control "F" is your friend.

a little birdie puts these ideas in my head. Thanks DH !

No, no AC yet. Haven't even messed with it. Just makes it feel more like my other trucks. Its all good.

Clyde got a little "bling" today. I can't rotate the stupid pic though.

Hmmmm

What do you need from Minnesota and where? I have a friend that picks up every week in Minn/St Paul. He grabbed an MRAP bumper for me once already.