Search results

Yes there are lots of adjustments you can make when adding a hard top. Front windshield frame tilt, door windows adjustments, and loosen the bolts between the top and back of hardtop and back of cab then roll up windows and get the gap right between window and rear part of top. Then work your...

Great battery but only if you can get them at right price. I have a 2001 that's still kicking strong but you must charge them as there site recommends and they are a AGM type battery.

Yes as far as I know all 939 share the same transmission

Okay here is the tag on my chain and the data tag on the rear of the wrecker.

Read your -10 it covers use up to a point

Don't pull more than 14,500 lbs single line. This is for 816. This is straight out of the TM. The 936 shouldn't pull more than 16,500 or 17,000 lbs single line according to the dataplate. Yes the winch can pull 45,000 but the safe will of the cable and chain cannot.

I will have some pullouts for 500 by next week. Give me call if you would like one.

Yeah Steve that's a level winder and if you look back they said it is not a Gipsy head.

Still don't know what a Gipsy head or pogo stick is?

Also Ron this is not an attack on your math as i was in agreement with you until I read the load tables. I also have seen two wreckers with bent booms and they were bent right in front of the lift rams on the outer boom and the inner booms were out just past the bend and this is why i will leave...

Okay so I have taken a look at this and the tm again and I think it can be done safely 2 different ways. First would be a 8 foot jib added to the inner extension and it should pin on and be rigged back to rear of main boom with cables like in Zebadee ' s drawing and should be good for 1000-1500...

Okay yes you need to make sure that the front passenger side gladhand is open to allow venting. Sorry we piled on you earlier.

Not a parking brake knob on the dash. It is the handle in between the seats that doesn't have a button on it. Please download the tm and read the -10 at least.

Might can get it from Carnac if you have the registration code off the door or hood. Does anyone have a clue where it might be on the frame if it isn't behind the steering box? Has to have one somewhere right?

Yeah you can forget it in California the new spread axle forward set puts you over weight on one axle. I found that out the hard way.

It is possible but tight fit and weights will be close to max weight.

Anyone have the tm for installing a fording kit? Or have installed one themselves? Need all information I can find I have a scrap truck with a kit on it and I want to pull it and reinstall it in my truck and don't want to miss anything

I can't post questions about the adds? Have tried to on my browser and taptalk neither is working.

Good man! Takes a big man to offer a apology.

Okay so I got to looking at the rear winches again and low and behold I have new pictures to share.