Search results

Great! Doesn't all the Ford stuff need a computer? I remember when I got my GMC, the 302 had a thrown rod. I rebuilt it in my apartment at the time. Engine still runs great 38 years later. They are bulletproof.

Your 69 year old truck needs a complete overhaul beyond the engine compartment. If your end goal is to transport dirt, maybe a late model truck is better suited to your needs.

Wow looking good. Data plate shows M45 which is cab and chassis with duals, but yours has been converted to singles with flipped hubs and the correct wheels. Good candidate to make a M34 cargo clone using a bed from a M135.

Yup around $6000. Has the wrong wheels and tires. The MG mount is home made and wrong. Was someone's pride and joy. If you buy it get the fuel line away from the exhaust manifold to prevent vapor lock.

The grease seal is the same as the hub, so any number of suppliers carry that. I found the felt dust seal "kit" by Googling the NSN (see above picture or TM for the number) which brought me to an ebay seller. I am sure the usual suspects like Memphis Equipment would have that as well.

Welcome. Looking at your picture I can tell that this truck underwent a very costly ground up restoration in the past. Meaning someone completely disassembled it, sandblasted every part, repainted and reassembled the entire truck while overhauling the power train. That is the pro. The con is...

And go from 18 mpg to 3.

That's why I snapped those pictures I posted. I couldn't believe it myself. Truck is bone stock.

I tackled the trunnion rebuild today. Nothing difficult just time consuming. I filled the rust creation sump with silicone, maybe that will prevent the u bolts from rusting away again.

The turbo 6.5 seems to perform very well loaded or unloaded. It will blast up hills at 75 mph unloaded, with the 21,000 gcwr it was only able to maintain 55 mph uphill in overdrive. If you are looking for an easy power plant upgrade for a CUCV, drop in a NA AM General 6.5, add the GM side...

Oh you want 6.5 turbo power. Here I am at 21,000 lbs gcwr uphill at 55 mph.

usually the starter bolt

I would start with a very high pressure hot water pressure washer. Looks like your truck left the factory tan and then uncle painted it green with the usual zero prep work. Hopefully most of the green will come off. You want to paint over the factory tan. If you resort to chemical paint...

I think I figured it out. This pictured unit is a model MIL-24U10ANQ and the mounting hole pattern is right for my (and other?) GoDov trucks. I am not crazy about SF's mounting this upside down so I believe I will make U straps so it will be right side up. I think Crapgame's picture above...

Has anyone figured out which model inverter fits on the GoDov GMVs? The mounting bolt pattern is 10X10.5 and that does not suit any of the models of Dimensions Inverters. (EDIT: EXCEPT ONE, see post 14) See attached spec sheet. The inverter in the SOF2 pictures above is much much bigger...

OMG this is a stunning vehicle, FINALLY something good looking after these silly looking designs from Oshkosh and the ITV. Put me down for the first one out from GovP.

Loosen the screws on the inner hinge leaves and see if you can push the windshield until the rails fit.

Well you are in luck, the Goat TMs are available on this site, go to forums/technical manuals/Korean to Viet Nam era vehicles. I have never separated the tractor from the trailer, wouldn't think this is a good idea, but the truck is set up to come apart there. You have to reconnect the yaw...

Put me down for one. Have the fabricator omit the weld joining the right and left halves so it's UPSable.

Wow your 1083 looks way too nice to part out. Why don't you just put it in the for sale section?