• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    REO M275 truck tractor

    Should be around the drivers side front spring perch.
  2. NDT

    REO M275 truck tractor

    Looks like they did not stamp the 0524 part of the serial number.
  3. NDT

    1998 M1078 A0 Wiring nightmare?

    Maybe not. He has one of the two WTEC plugs, just splice matching color wires (solder with heat shrink, no crimp connectors), find the missing WTEC connector, same. Then the behind the dash harness, he has a cut-off of that as well, seems like armed with the schematic diagram and a test meter...
  4. NDT

    1998 M1078 A0 Wiring nightmare?

    Yes the one by itself. Looks like a car radio.
  5. NDT

    1998 M1078 A0 Wiring nightmare?

    Studying the driver's instrument cluster photo, the harness coming from the transmission with the colored wires branches into two as is required for the WTEC II ECU. I think you have the right one.
  6. NDT

    1998 M1078 A0 Wiring nightmare?

    That's WTEC II ecu.
  7. NDT

    REO M275 truck tractor

    Hmm, serial number is unusual. What does the data plate above say about what the maximum towed load highway is?
  8. NDT

    REO M275 truck tractor

    All of those mechanical deficiencies will take a half day to fix. Dead batteries are to be expected. The only reason I would hesitate is if the rust you describe is actual holes in the metal.
  9. NDT

    m1028 duallies -what were they used for

    Never know until you try. Get the da sander and time for some archeological research. That is your only hope to figure out prior unit assignments.
  10. NDT

    1998 M1078 A0 Wiring nightmare?

    Quite a few parts trucks out there. If everything else on the truck looks good, I would not buy an entire truck to get harnesses that will fit in a large flat rate box (maybe?). Just keep in mind that it's always a possibility that this truck was brutalized because there was something...
  11. NDT

    Community Feedback: Aftermarket CIM for 805b/806b

    I say option 2 and option 3. Thanks for supporting these units.
  12. NDT

    1998 M1078 A0 Wiring nightmare?

    1998 were all WTEC 3. Edit: Or so I thought, see next post.
  13. NDT

    Community Feedback: Aftermarket CIM for 805b/806b

    You may have already done this, but I would start by contacting a global retailer such as Green Mountain Generators to gauge demand for your product and see if they could retail the boards to their customer base.
  14. NDT

    1998 M1078 A0 Wiring nightmare?

    Ouch it got the super axe whacker treatment. I say forget trying to sort out the whacked harnesses, get take outs FROM A 1998 to 2000 model truck. He's missing all the transmission control keypad and brainbox, which is all integrated in the harnesses. You could easily get the engine cranked...
  15. NDT

    New owner of 1997 LMTV

    How does one get a bone infection, how did you know you had it? Stepped on a nail or something?
  16. NDT

    Jeepsinker's M35A2 6BT Cummins swap ( pics and videos)

    Looking good in the engine bay and the rest of the paint looking good as well. Haha I always figured the multifuel engine would be like the cockroach, still running after all other engines dead and gone.
  17. NDT

    Some annoying starting issue

    See if any connections get really hot after extended cranking. That indicates high resistance and could be the reason for your issue. The slave connector cables bypass the cables that connect to the batteries.
  18. NDT

    M998 No POWER to ANYTHING 6 volts only !

    The Cannon connector the points upward from the start box in the engine compartment is known to get corroded between the wire and the terminal resulting in all kinds of bizarre things like you described. It will ohm out good, but not pass an electrical load.
  19. NDT

    m1028 duallies -what were they used for

    Shelter carriers in the Army as well.
  20. NDT

    Identifying a 60's generator set

    Hello, welcome, good luck in restoring democracy in your country. You are correct, that unit is very early 1960's. I did a Google image search for "Wisconsin MBKND" and sure enough there are pics of a similar unit and ebay listings for parts. At 1500 watts, added to the complete...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks