Search results

DMV does not care about the M designation. If the frame VIN does not match the title, you can retitle the truck via bonded title. If the frame number matches the title but the dash plate is wrong, contact Vintage Power Wagons for a blank plate.

I would run the engine with the cab tilted to see why you are getting severe vibration on the engine.

My LMTV had a lot of visible blowby until I changed the oil, then it went away.

Way too high. $2.00/mile for 1/2 a step deck is more like it. Call Joey at United States of Freight. Truckers love to come to Houston because getting a load out of here is like taking candy from a baby.

Ohm out the solenoid at the transmission Deutch connector, the ohm value is different than at the controller.

Yours took too many blue pills and mine needs some.

Guys I'm at ground zero of this and gas is $2.10 and Wal Mart, Home Depot etc is fully stocked.

Exhaust open to the rain=piece of crap.

Sumtin not right there, 6th gear is 10 mph top speed in the 915, not sure how you could get to 79 mph even with the OD in the 1138.

Check the wires coming out of the Amphenol connector on the start box, they can get corroded, have cold solder joints etc, and become intermittent.

It's nice. They all are in about that condition. Get a tan one if you prefer tan.

Oops, belay that in that case.

Contact fuzzytoaster on this site, he has nice 1101s with canvas and SF 97s in College Station.

In Texas, trailers heavier than 4000 lbs gvw need titles. As the 1101 is a 3/4 ton trailer, a title is not required and the SF97 is not required either. Paying for one is a waste of money. 1102 trailers gross out at 4200 and need titles/SF97s.

Usually the crappy lever switch under the dash. Of course you have the light switch in "stop light" position and both bulbs check good.

Get a Delco 33si, it will go right on your Chevy engine, member 74M35A2 has the best deal on 24 volt versions of this. PM me if you don't want your take off 60 amp alternator from your Tornado.

Welcome to the forum. What a great project. Start with a good pressure washing, then turn the scouts loose with putty knives to remove paint flakes. Then wash again and spray the tank stem to stern with Behr house paint (perfect application for this). Paint shade is probably a decision by...

Please expound on the info you published in MVM years ago, i.e. all mfgrs, M numbers, years produced, serial number ranges. Also any theories you have about how gas powered trucks were remanufactured into multifuels and when. Then, in the 80's, the super single retrofit program with the...

The NA trucks like to leave a smoke trail of where they've been, that's normal. Steel brake lines are an easy auto parts store fix.

I think the 2011 is the same as used with FBCB2-BFT. No idea how MTS operates, sorry.