Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I was looking into the xdoors and i came to the realization that it would degrade after multiple slamming. I wanted an aluminum solution. I ordered some skins from twistedmetal llc. I will try those out. Mme and fmp had some nice doors with full windows as well but I didn’t have the funds for...
Antenna? That makes sense why it is missing. Demil requirements. I do have that huge power connector in the rear passenger floor. It takes away a lot of foot space.
i guess for the hole, maybe I will stick a light in it or just plug it.
Thanks.
I’ve been looking all over and it seems the versions of what you posted that I have does not contain “Speedometer Harness Assembly Replacement” in it. Can you send a direct link and page number of where you saw it? That might help me out. Thanks again~
Hello all,
i am trying to figure out how to mount some harness mounts for the 80mph speedo. All I have is this from the TM
is there another TM that provides details? I assume part 10 goes inside the dash to offset the resistor so the wires can fit better. I al looking for exact locations for...
Thanks again action. I did see it somewhere that it was “AC request (not used)” somewhere. Also it explains why I don't see metal wire at the tip of the wire yet it forms like a metal wire when I bend it.
Definitely 348C
i posted 2 photos of it because it is hard to see. No manual focus on cameras these days. If you look at them long enough, you can make out the 3 and more so the 4. The 8 and C are pretty clear.
Hello all, I have searched for what this wire is, but can’t find anything about it. Below are some photos:
The list of military vehicle wire codes:
The plate with 348 C code. View from the top behind the alternator.
from the bottom far away:
closer
up close
quick question on this trans. The speedsensor wire on my harness has been cut to the nub. All I see is two white wires. If I solder a new plug on, does it matter which direction I install it or is one a voltage source and the other data? How to tell which is which?
Hello,
Quick question.
for this piece, is the nipple facing in or out?
the TM just looks like a circle. I know it is mounted on the outside with the plate on the inside. Just need to validate the nipple direction. I am thinking in.
thanks guys.
They were already cut from what I know.
they took the whole hood. I ended up getting a brand new hood from the same location for 360$ But it came stripped. I will either wire the lights directly to the cut cables or find the proper plugs and use the harnesses.
Hello all,
It seems that the 2 connector plugs on my harness that plugs into the corner light harnesses has been cut off.
Instead of replacing the harness, I was wondering if anyone had these off a broken ecv harness or had extras off an ecv hood they aquired.
thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.