Search results

Is that hard cab a military kit? Looks like there is a cutout for the front of the bed. Never seen one like that.

Adorable little unit. Be aware if you plan to actually use it, the grease in the armature end bearing might be no good after 78 years, leading to a failure. The oil pan may be half full of goop as well, leading to oil starvation.

Well since you ALREADY read supplement 7, you know you are in limp mode and you have “undefined ratio errors”. That means the computer is expecting a certain numerical ratio between the tiss and toss and it’s not seeing that. Why is the question. Could be several reasons such as smoked...

Probably easiest to make a set. Use the #1, #3, and #5 stave from a M35A2 set. Get the red oak slats made at a local mill.

M37, M715, M880, CUCV, HMMWV

I replaced the prehistoric AD5 with a Haldex Purest. It will fit in the factory location barely.

I would start by verifying if the PRND21 detents inside the transmission are lining up with the steering column indicator.

Couldn't agree more. That engine moves around and a massive short will burn your truck down.

Wes or try Feltz tire. Tell them you want 37s factory mounted on combat rims ready to go. Save yourself huge headaches dealing with run flats and hidden punctures.

I would focus on the brake light switch. It causes headaches. The report that your 4 ways works rules out the bulb filaments, lamp grounds. You should have the dual brake light switch. Are you sure it is connected correctly? Is the linkage set up right? Put your ohmmeter on the switch...

https://www.steelsoldiers.com/threads/painting-military-equipment.165334/

What is a M741?

No they vent to the dirty air side.

Back off the adjuster?

86humv from here made them up.

Maybe a CTIS seal leak is pressurizing the axle. Paint some Mr Bubble/water solution on the vent hose and and see if air is coming out.

There’s always grade 9 if you are expecting to put 35,000 lbs of tension on each bolt.

Grade 8.

Too far gone. Too much time wasted with repairing what you got. Sorry

But you have the fording control!!! Seriously, time to post a parts wanted ad.