Search results

Not sure about torque but it can handle 200 hp at 2800 rpm all day.

Double check that. To put the old crappy driver seat in after being converted over is unheard of.

Are you sure you don’t already have that? All the GMVs did.

Ebay search "HMMWV data plate"

Simple matter of buying a new plate and restamping the numbers on it. Rivet the plate back on and nobody will ever know.

There is only one breaker inside.

Oh good your alternator is working. But you are saying the battery voltage stays at 24 while the at alternator voltage is 27?

If you are getting 24 volts to the excite wire at the alternator, sounds like the alternator is not working.

You found the problem. The return line does not tie into the vent system.

There are 4 cone washers that are stuck. Tap on the studs with a brass drift, tap on the arm, anything to jar them loose.

You kinda have a pig in the poke. Until they are unrolled and evaluated, they could be scrap value or quite a bit more. Almost any buyer will want you to band them to a pallet and load a motor freight carrier. If you can do that, someone might take a chance and pay you $1000 for the two rolls.

When you say “air cooled” visions of a Briggs and Stratton engine pops into people’s head. The Onan engines are bulletproof. The market has moved to water cooled engines mainly due to them being quieter.

That engine was remanufactured by MTP Drivetrain in Many, LA. They do great work.

Determine your level of heat stroke while repairing truck when it’s 107 degrees

That is enough shoes for either vehicle mentioned. Create a classified ad here in the classifieds if you want to flip them.

That track could be good or not good. You have to look for what is called “dead shoes”, which means the rubber bushings inside the pins is shot and the two adjacent shoes pivot freely. If there are multiple dead shoes, the remaining bushings are not far behind.

That is the T130E1 track for the M113 or M548. How many shoes do you have?

Read papakb’s second paragraph above

My understanding is the newer MTRs with Kevlar are more prone to blowouts.

Open front glad hand covers and see if that resolves issue.