• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Question about the paint color on my 923A2

    The 4 color scheme was long gone when the A2's came out.
  2. NDT

    M275 trailer towing

    Im sure. I sandblasted every inch of that frame personally. Maybe it was a mwo or running change.
  3. NDT

    Wrecker rear drag winch

    Egads, with a snatch block that is 90,000 lbs of pull. What are you unsticking?
  4. NDT

    M275 trailer towing

    cphillips, does your truck have the valve? It should be under the catwalk.
  5. NDT

    M275 trailer towing

    Recovery, I see the tractor protection valve in the 34P, but my A2 s/n 10277 never had one, it was plumbed like the slick and A1.
  6. NDT

    M275 trailer towing

    Exquize me? You can open the emergency gladhand valve and drain the air in seconds.
  7. NDT

    M275 trailer towing

    I do not live in a hilly area so I just use the manual parking brake. I suppose the only way to apply the trailer spring brake is by disconnecting the emergency line. I retrofitted a tractor protection valve on my 275.
  8. NDT

    Looking for hood numbers M135

    Mine is serial 376, hood (registration number) is 41120433. You could add the difference in s/n to my reg number for something close to correct. Nobody is keeping a database.
  9. NDT

    M915 low power. Looking for likely problems.

    Hmm, mine only develops 15 psi and I never thought there was anything wrong with it.
  10. NDT

    Appels m548 recovery and rebuild

    I will buy any extra useable road wheels you have.
  11. NDT

    help removing lugnuts

    cutting torch
  12. NDT

    Restoring A 1943 M10 ammo trailer

    I would sand and paint. I have the tarp bows for those, also stacks of SF97's from the 1950's.
  13. NDT

    Q's about the dreaded Texas Bonded Title

    All you need to do is mail the dmv the vtr130sof and vtr270. They will send you the rejection letter and valuation shown on an adding machine tape, take this to the tax office with your fmv app and bond. Costs about 400bucks.
  14. NDT

    Putting a HMMWV 400 AMP alternator on a Cummins NHC250. Has anyone done it? Need info

    Might be 5 amps 12 volt too. It is only designed to power the 4L80E trans controller.
  15. NDT

    Bypassing the master light switch??

    Funny story: Coming home late one moonless night without a flashlight, my 3 lever switch failed. In complete darkness, I cut all the wires going to the switch, stripped them, and twisted them together to get my lights on. I was not always well prepared back in the day.
  16. NDT

    Engine swap in Mep-004a?

    Everything electrical attached to the head. I suspect the governor settings are different too.
  17. NDT

    Spicer 6352 transmission help

    All your synchronizers are shot. A different take out trans may be cheapest. Call around to Memphis Equip and Sam Winer Motors.
  18. NDT

    Newbie questions...auction prices...

    I've been buying GL and DRMO for a long time. There is no rhyme or reason to prices most of the time. People get all gaga because it is army surplus.
  19. NDT

    M715 oil grade

    10w30, filter PH8A. Cable is correct.
Top