Search results

. Those cage bolts are what pull that big monster spring "into the cage". Or maybe the caged position. Insert the proper cage bolts, turn the bolts 90 degrees to fit the "pocket" they fit in, snug the cage bolts with a 3/4 inch wrench until they don't turn any more. - GOAL is to restrain...

. I'm definitely not an engineer, but the one I used to work for claimed "flat washers only" no lock washers - ever. A lot of the things I built for him are still around. Found some old blueprints with a sub-note on each page "no lock washers" I asked about that one time and his answer was...

. That's sad Owen... At one point in time DeWalt bits were made out of good steel. That is pretty crummy. Used to be that cheap bits were crummy and HF wasn't ever the place to go. Seems like everybody is jumping on the cheap bandwagon - even American companies.

. Will, I finally got out in the yard for a bit. Gentle tap wasn't enough. A fairly hard thump directly on the steel of the shoe broke it loose. Went to the intermediate axle, same action - took only one hit. THANK YOU! Picture above is now the official Brake Release Tool for my M1088...

. Welcome to the outfit! Looks like you have lots of wide open spaces to "go play truck"! As a new member, be sure to go to the Technical Manual section and download the TM's. https://www.steelsoldiers.com/#technical-manuals.95 Those are really handy when you need to know what wire does what...

. Lubricants... Just remember, if it was working before - changing it to something else may not improve your situation. The military has plenty of money. If they thought 10 kinds of oil would make it better, your money would have paid for it. On the other hand: If you think you need to have...

. Wow jasonjc , Most of us replace the boots with the axle still attached to the truck... What you have there sure is a lot easier than standing under the fender! .

. Neat. That gives you plenty of sleep space - and storage under. Doesn't have to be fancy. Kinda cool...

. So... I picked up my very first thing from GovPlanet today. Maybe I was "gun shy" and more conservative than normal... I called and talked to a real human on Friday 4/9/2021. Not here in the state, in California (I think). They agreed that my item number was sitting on the yard. The...

. If somebody hasn't already spoken for the axle clamps, I would like to have them. Tim

. Thanks Will... I will give it a shot in the morning. Only have one chock here. Several at home, so I will bring more and give it a shot. Really appreciate the information! I will report back tomorrow... Tim

. Wes, You mentioned "dual wedge systems the quick release valves have one that operates right side tires and one to control left side" . If that is the case, maybe I need the TruckPro part number for a replacement valve? Tim

. For whatever it is worth: The rear two chambers on the right rear axle (both chambers) "creaked and popped" just a little as they were caged. Intermediate Axle is also caged - both chambers. (no creaking and popping) NOTHING changed at all. ---- Thought it might be worth mentioning: Caging...

M1088 sat for two weeks. Rained a few times. May have nothing to do with it... Both wheels on the right (passenger side) will not release. Forward, Backward, Tires will not roll. Right front DOES roll (works fine). Of the 6 wheels, 2 are stuck, 4 roll as they should... Bumped the drum a...

. Welcome from North Carolina! Getting some "seat time" before you make a purchase will definitely be a good idea. Again, welcome to the group - and good luck on your quest!

. I might just need to move that tank inside the rails somewhere... Bring on whatever you have though - and THANK YOU!

. Neat Tool for installing the lock is about $10. There are better and there are really flimsy ones too. No such thing as "too much slickum" when you try to install it. AND yes, I am hiring the installation on my windshield. I have installed plenty of small glass - with new rubber...

. Hi Tracer , Be sure to take some pictures of the interior of your S-250. I was pretty sure that I could get my S-141 ready for Denton but I have just about decided that it isn't going to be ready in time. I could slap something together - but if I do it right - the first time, I might be...

. Agreed Gamble ! We definitely don't need to fearmonger for sure. On the other hand, if MV owners try to do sneaky, sly, or underhanded things to get vehicles insured or registered - my opinion - is that somebody (one of us) will end up with a problem. Getting your car registered in another...

. Congratulations on your new purchase! Very nice looking truck for sure. Be sure to gather up your own personal copies of the Technical Manuals (TM's) as a new member. TM-9-2320-366-(10, 20,24,&34) is what you need. (Eleven) Your truck is part of the M1083 SERIES of MTV's. Welcome to...