Search results

I found a inventory sticker, indicating the unit came out of the Army ECBC. This unit was exceptionally clean, other than some cobwebs in the control box. The S6 switch was broken off the mount, but I was able to fix that. The casters on the base are my HFT addition. Some minor sheet metal...

Picked up a MEP-802A off GL in Lockbourne in January with 500hrs. No signs of water damage on the muffler or in the crankcase. Turning the fan turns the engine (only moved it a little, not to scrape the cylinders until I get some oil in there). The only obvious damage was a broken drain wellnut...

I used "High-Temperature Rigid Metal Duct Hose for Fumes" from McMaster-Carr on my MEP-016D. This comes in galvanized or stainless steel. https://www.mcmaster.com/#duct/=1buqv7f. As the previous commenter stated, "Please don't kill yourself with your generator". As a minimum, get a carbon...

Just ordered two brass fittings from PlasticMart. $17 for both, plus 16 shipping (2/2/2018). Received them in about a week. Since they use an O-ring, I tightened the nut until the O-ring is compressed in the groove, and no more. Since you can't see the O-ring, you have to feel it in the wrench...

Does anyone have a generic / industrial part number for the generator bearing on a MEP016D? I can't find a cross reference to the part number from the TM manual part number. Mine sounds strange, and I would like to get a spare. Thanks H.