Search results

Hello all, this may be a long shot but my dear friends in Hamilton MT have sold their home and I have a M101A3, that is road worthy, moved to Frederick Maryland. Any help would be appreciated! Thanks,

I’m in. Thanks!

Looks like its from the Swiss military! I know Eurotruck brought in and sold a bunch of the Swiss Unimogs and Pinzgauers about 15 years ago.

I've driven my M1009 in -20F with the grille blocked and have good heat output! I agree with doghead, check your core.

Sounds good to me! If able I will be there!

Yes you can use that port for oil pressure. It's a 1/8in NPT plug. It is also used for the Bank's turbo oil supply line if installing their kit.

I don't know about Pennsylvania but here in Montanna it is legal to pull two trailers. There are many peaople that have a fifth wheel camper with a boat or several four wheelers on a trailer behind the camper. Oh, its also legal to drive the four wheelers and UTVs on the roads!

I have sold all the grommets that I had!

The 700R4 or 4L80E with the G/V and a Turbo is the combo I'm considering for my M1028! We like to go camping here in Western Montana with an Alskan camper (about 2K #) pulling a M101a2 with a quad and other supplies. The mountain passes we go over can be 5 to 10 miles long and the G/V would...

Just getting home from Missoula! Turned out it was not an axle seal. A small amount of oil was comming out of what I believe is the end of the crank case breathing tube next to the turbo? It appears that a hose may have attached to it, if so it's missing now. The tube comes out of the valve...

feezy should be here any minute now. He did descibe it as having oil covering the inside of the fender though. Would that be considered spewing?

An SS member "feezy" is driving a Duece from WA to Minot ND and he his having problems with a leaky front axle seal! He is currently 70 Miles east of Missoula, MT . I will be meeting him in Missoula to pick up an M101 trailer that he's transporting for me. I have no Duece knowledge and his...

Glad you figured it out!

Ttt

Hello All, I have a road worthy M101A2 near the Tacoma WA area that needs to get to Hamilton Montana. This is the last one of four that came out of Lewis. I brought home the three in a trip several months ago and planed on taking a vaction with my wife to check out the coast and get the last...

The vacuum pump is located where the distributer would be on a Chevy gas V8 ( top near the firewall passenger side). Remove the air filter assy to see it bettter.

I do love living in Montana!

I run group 31 batteries in my rigs! The tabs are set up to fit them, all you need to do is move one of the threaded rods over. There is even a hole already there for it!

I've got a few new original GM still in package ones. $5.00 plus the ride!

I'll second that welcome from Montana!