Search results

Hi there, I have a line on a very nice 20k front winch with levelwind off a m813. Want to put it on my m931, I know I have to get all the hydraulic components but my question is will the hydraulic motor bolt up to the older style shaft driven winch?

Hi there I purchased a remote and cable for my hemtt, my cable has the wrong connections on it. does anyone have a part number or place to buy the correct 14 pin connectors for the cable that goes between the remote and truck. thank you.

HEMTT M985 filter numbers Here are some filter numbers for the HEMTT M985 Military part #'s Baldwin part #'s Fleetguard part #'s spin on oil filter #23518666 #B95-MPG #LF3380 spin on...

Hi there i have a hmmwv with a 6.5 engine and a 4l80e trans. Is there a wire connection or a reverse light switch on this tranny. Looking to hook up reverse lights the proper way. Thank you.

Hi there on the 5 ton wheel with ctis the valve is on one side, on the other side is a steel block is this a counter weight for the valve, or is it just a wheel weight and would be there regardless if the truck has ctis or not?

Hi there I purchased 4 like new 95% 37" goodyear's about a year ago I have put about 5k on them (mostly street) and there 1/2 to 3/4 worn already has anyone else had this issue with surplus tires?

Hi there searched the forums and got some leads but still have questions. My m925a2 it could sit for days even weeks i get in it turn the key and instantly starts up but once i let it run or drive it and shut it off when i go to start it back up the shut off solenoid is not engaging i have to...

Just wanted to say thank you to will aka Suprman helped me out with some parts for my m998. Do not hesitate to deal with him on anything great guy!

Hi there when i start up my 87 m998 the amps gauge pulses from yellow to green for about a minute then goes into the green and stays there. it does this whether the truck is hot or cold and if i turn the lights on while its pulsing they will pulse also. havent dug into this problem yet just...

Hi there tried doing a search on ball joints but couldnt find my answer? I just picked up a 87 m998 could use new upper and lower ball joints and tie rod ends can i just go to my local parts house and get parts for a 92 hummer h1 or is the m998 different? any help would be appreciated thank you

Hi there has anyone ever done an external winch control lever? like the lever in the truck then one near the winch? tried a search but nothing came up.

Hi there has anyone run into this problem installing a winch on my 923a2 everything came off an 932a2 the bracket for the hydro valve doesnt fit in the holes my top hole is 4 1/8" down from bottom of frame rail.ill put up some pics later but even the bracket for the cable seems to be wrong too...

just wanted to give a big thank you to TurboMustang370 for selling his winch to me and taking the time to save all the hardware and take pics for me he took the time and removed it nicely for me. great guy and excellent seller so thank you!

Hi there will the winch level wind off of an m816 wrecker fit the winch im putting on my m923a2? the winch im installing came off of an m932a2

Hi there installing a winch on my m923a2 can anyone give me a pic of the hydro filter location and the way the hydro lines run thank you

Hi there going to be installing my first PTO on my m923a2 the pto im installing is from a m932a2 wanted to know is there a backlash setting and if so is this done with shims? tried looking at the TM's but couldn't find it any help would be nice thank you P.S I don't have the pto in my hands yet.

Hi there does anyone know if the hydro tank behind the cab on the m932 is the same as the tank on the side of the m925?

going 2 be bobbing my first duece have 105 trailer for the bed an front springs an hangers sure this has been said many times but to make my life easier does anyone have the measurements like how much to cut off the frame an where to place the spring center. i could figure it out but so nice to...