Search results

The early 850 engine have trouble with the time chain which destroys the engine,

Was 3300. the factory speedo fits perfect with the 40‘ +- 3%. think they not adjust them for the Short 3.08 Diffs.

80mph 6,5turbo, 4 Speed, 3,08 diffs, 40“.

Hey guys, I have Strange Problem. My m1151a2 charges when the its idles. If the rpm is higher than 1200 the alternator (and Tachometer) stops charging. After 10 sec back in idle, start to charge with 28v again. Changed the alternator, regulator and smart box. Any ideas?

Hi, i have a VIC-3 full station in my Humvee. i have a whistling Noise in my headset depending the rpm of the Engine. only in Live, VOX or PTT if the PTT is on. anyone have the Same issue? I think its Not normal. greetings

in you have a 4 Speed, There is a disconnect relay behind the passenger Seat.

Thats a nice one. I saw a lot with missing airfilter and caps. Water was in (mostly the rusty line water line is visible) from the missing intake cap. But only about 1/4 of the filter was filled. Is there a valve that the water can go out or does the water goes in the engine? Best regards

M1078 Lift Kit for leaf spring? I drive 53“ on my M1078. Drives Great and much better rpm at 55-60mph. The tires are big and the front end is lower the the rear. I think to install a lift spacer at the front between axle and suspension can help a lot. Any experience with something like that on...

Thats very very nice. up to now i have only the a0 Manuel for my a1. thank you in advance

Hi, i put my shelter on the Trailer yestreday. i fixed it with a strap only. But the weight on the lunette is about 50kg. i will put extra diesel, Heather, cooler and bed in the Front to get more weight. And i have remove the Generator mountings. i think the benefit is the shelter is very...

Hi guys, i checked the System again. no foam in the system. Noise is still available. High rpm, high noise. If the humvees stopped the steering Sometimes works hard and sometimes soft. my father has a a2 and its noisy as well. Not so much like Mine. The noise was much more when i Drive a...

Hi together, i got my a2 4 months ago, my third humvee now . Less than 5.000miles and nice car. the steering was noisy and works hard mostly. I checked the lines and hydraulic winch with leak spray, and turned the wheels left to the right (engine off) like in the manual to get the air out. no...

Very nice. is there no issue with to much weight behänd the axle. Because your shelter is the longer version. i have the same trailer and can get the same shelter. thank you.

Hi, i have 2 VIC-3 lite sets for my HMMWV and the LMTV. I have a set of David Clark headset with the with U-174/U plug and i have two Peltor Cometacs XPI with the standard Peltor plug. Does these headsets are working with the VIC 3...

Hi, i got my M1045A2. But the steering pump is noisy all the time and the steering goes hard. When i start the Humvee and he is cold they work good and makes no noisy in the first minute. Later it will be bad. There is no air in the system, or i saw no air and i tried several times to get air...

Hi together, i found the numbers. fuel seperator https://aerobasegroup.com/nsn/2910-01-360-6366 Fuel Filter http://www.parttarget.com/2910-01-424-7315_2910014247315_224491.html/-F936DE5D-A76A-4F19-B5D4-AD448BD6A362

Hi together, im loocking for an lmtv A1 tm but found only the A0 one. When i drove last Weekend with my 2004 m1078a1 he jerked/stuttered. He has only 6500 Miles and like new. I changed the oil and oilfilter 3 years ago but not the fuel. And now i need some numbers. Is it correct that i need...

Hi, i installed my 16´s yesterday. drives well. But rubs. Mostly in the front at the water tank/ step. Perhaps it´s possible to move it a little bit to the front and cut the fender. First i will install a lift kit between the sping and axle at the front. Should be a simple part.

Sorry, wrong Thread

The cap spring Mount wehre you can see that the tires rub.