Search results

1986 1 ton, not modified. Was driving truck fine lost power gauges went haywire died on the side of the road horn going off battery terminal melted down pulled off terminals towed home. Replace melted terminal hooked up with two fresh batteries blew the fusible links blue wires at the breakout...

I'm not new to the CUCV have M1009 and M1008 + M35a3. The 1008 was sitting several years inside, very nice truck no rust Purchased this fall and runs and drives great. Now that the weather has gotten colder if you leave it outside very long you will have a hard time getting it started. I...

have done a front-end rebuild and pulled the whole front apart putting everything back as it was before no lights at all on the right side left side works grounds are Good grounds are back in place I'm stumped

I have a 1986 M1009 and have found a 1985 M1008 cab wiring harness complete. Will it work in my M1009? I don't really need it yet, but as a new owner of this truck I am finding things like my fuse box has been hot at headlight fuse & some terminals are not great at plug points. Any input from...

BOUGHT TRUCK E-BAY SCARY. RUST FREE m1009 , RUNS GREAT AND RUNS STRONG. AFTER DRIVING AWHILE 5-10 MIN HEAD LIGHTS, GAUGES, T/S BRAKES ALL OUT WOULD NOT TURN BACK ON. HAD TO DRIVE BACK QUICK ON FOG LIGHT OWNER ADDED. DID ALL I KNOW WTIH THIS TRUCK BUT NO LIGHTS. HAVE GREAT m35A3 FOR 3...

I currently have a super nice M35a3 with 3800 miles and 575 hrs on it great paint and well maintained. Was a old Sparta truck when I got it the 1,942 miles on it. I have been looking to upgrade to a M923a2 only because of road speed reasons and bigger cab. I have done all I can do to my M35a3...

I installed a set of AVM hubs on my M35A3 and they work great, thanks C&C. The problem now is you cannot reinstall the stone shields to protect the CTIS system. Does anyone have any ideas or have already done something?

While changing trans fluid on my M35a3 the rear hole for the what I call the skid plate for the air pack on passenger side is stripped out crap. After looking at things does any one see a problem with drilling all the way through it to put 1 size smaller bolt & lock washer all the way through...

I switched out all 6 tires 14.5x20 to some new 395's this weekend and 5 of the six went well to say the least. I have problems with 1 and have broke it down 2 times replaced the rim o-ring & the pipe ring too, tightened up and reinstalled on truck, airing up through CTIS valve and at about...

1993 am general 1,942 miles 347 hrs from waukon iowa. Fort mccoy wi truck. Starts & runs great, 4 hr drive home took a trailer. Bought from 1st owner never took title, spent life on the farm last 3.5 years. Going to give her the tlc she needs now. Solid! Enjoy.

Recovered a nice one first truck for me. I will get some pics up soon. I have several questions. I have a turn signal flasher problem it takes along time to start flashing, you can run the switch and cut lights off looks like it may be the relay under the hood ideas before I purchase one...

Help, new guy here looking at 1993 M35a3 deuce to purchase close to a deal, truck runs great starts fine, but I cannot get any of the lights to work. The switch does not hardly move in any position. Could it be frozen up inside? Any help in this area would be great. I am sure there is a easy...

I am just getting into this new arena and hope to learn a lot from you all. I am trying to decide on some local trucks and would take any input please. Already bobbed M35a2, but a stacked frame with 53" tires & winch hard top, or M35a3 untitled with all the GL paperwork 6x6 yet. Seller wants...