• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2011 PNW Mini Rally #4

Jinx

Buy me a Coke
Steel Soldiers Supporter
729
148
43
Location
Gainesville, Florida
Dang. I meant to do a preliminary PCMS on the truck this weekend but totally forgot. Looks like I will be doing the check the night before the event.
 

Stalwart

Well-known member
1,739
33
48
Location
Redmond, WA
I gotta do some checks as well, including an oil change. I normally operate the crane at idle and that dilutes the oil with Diesel. Luckily it's only 8-9 gallons of oil, unlike the Cummins I drove years ago that held 15.
 

Josh

Active member
1,678
12
38
Location
Portland, Oregon
Hehe. I just did an oil change tonight, Poured the oil into the gas tank. 50 miles of free gogo juice every oil change is always nice. I just got do another test drive to make sure the fuel system is up to snuff and then Im ready to roll.
 
276
22
18
Location
Hobart, WA
I gotta do some checks as well, including an oil change. I normally operate the crane at idle and that dilutes the oil with Diesel. Luckily it's only 8-9 gallons of oil, unlike the Cummins I drove years ago that held 15.
You should take a viscosity reading on the lube oil - I bet it's really not diluting much - never hurts just to change of course but might not be the dire need as imagined...

I replaced the master cylinder in the Duece and she has brakes again!

I also fixed the passenger step I managed to turn inside out when I got the truck stuck - only leaves a dead headlamp and a flasher unit which does not flash...

Got the new flasher box but headlamp is on the slow boat from the east coast... might make it here prior...

Then just gotta get the spare Cletrac radiator out of the bed and on a pallet... Never got a chance to mess with the crane as I've been up in Ketchikan, AK all last week...

Slowly but surely...

Did get a pristine copy of the June 1st 1943 parts book for the MG-1 M2 Cletrac's in the mail today - 184 pages of illustrations and parts break downs! Way cool...

Matt
 

Attachments

Stalwart

Well-known member
1,739
33
48
Location
Redmond, WA
Very nice Matt, glad to hear thins are comin' along.

I've been noticing a reduction of oil pressure when hot and it feels more like a multigrade than straight 40. I don't like to see 5 psi when hot, common but I don't like it. Luckily a Chevron dist. in Ballard stocks Delo 100 40 for all the boats.
 

ABN173

Active member
1,842
11
38
Location
FT Bragg, NC
Scott,

Sorry I could not meet you and REO 54 at GL. Besides being on a Monday the last two weeks have been rather busy for me.

-Dale
 
276
22
18
Location
Hobart, WA
Very nice Matt, glad to hear thins are comin' along.

I've been noticing a reduction of oil pressure when hot and it feels more like a multigrade than straight 40. I don't like to see 5 psi when hot, common but I don't like it. Luckily a Chevron dist. in Ballard stocks Delo 100 40 for all the boats.
Yeah - at least 10 or 15 would be nice! You going to Covich? That's what I've been running in the duece - get it for free from the Highway boats... They use it for the little Kitty motors... 3508, 379 gensets...

I am debating running the older m-series korean era lights on the wrecker or modern composites... Still cannot decide...

In other news I ran into a Saracen just fresh off the barge in Ketchikan, was parked at the State Troopers and owner privately by the Lt. on duty - we talked a little bit but it seemed in nice shape... Kinda random but fun; got some pics if you're interested...

Matt
 

Josh

Active member
1,678
12
38
Location
Portland, Oregon
I think we need to come up with a scanengers hunt for mike. Just put random parts on it and see how long it takes him to find it all. rofl


Hrm, I need to make a list of all the things I need from Brad, But I shot myself in the footday and bought a suburban so cash is scarce.
 

hwcurtice

Well-known member
1,558
35
48
Location
Moncks Corner, SC
Yup hw came through. i'll be owner of a nato cable now hehe

Currently, I'm the owner of a NATO cable. Not sure what to do with one. Maybe sell it on Craigslist for $50.00 :lol:

Anyone got $50.00? You may have to wrestle Scott for it, but after his surgery, should be easy enough to do! rofl

So Jinx, what time are we meeting in Sultan? I have a feeling if I don't show up Saturday, Scott may follow you home...
 

ABN173

Active member
1,842
11
38
Location
FT Bragg, NC
no problem dale. i was running late myself. you going to make the rally?
Hey,sorry to miss you Dale.Didn't know you were about.Not to worry,I'll be back..
Maybe see you weekend??
Perhaps, My wife is off work for the weekend which almost never happens so she may have other plans. I considered maybe hitting the ski slopes or at least taking the family to hit the sled runs. Normally we don't have the funds but we just received our taxes so maybe we can spurge just this once. I'll let you guys know later in the week.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks