24V Headlights

[motormayhem]

Does anyone have part numbers for a set of 24V square sealed beam headlights that would drop in? One of my lights went out and I want to put that load over on the 24V system if I can. I already have a relay system installed so the headlight switch doesn't see the load from the headlights. So if I could find lights that fit it's just a matter of swapping the relay wires around.

 

[Jeepadict]

I'd advise against your plan, instead getting some off-the-shelf LED headlights such as from Truklite or Maxxima. The load from those is negligible at worst.

Sent from my SM-G970U using Tapatalk

 

[Barrman]

I second that. Don’t make a wiring nightmare truck worse by making it more complicated. I have had the Trucklite LED units in one of my trucks 5 years now with excellent light and no issues or sun fading.

 

[chevymike]

I put a headlight relay kit in, which still keeps everything at 12v but allows the lights to pull power directly from the battery. The headlight switch only controls the relays now.

 

[Barrman]

I wasn’t writing about the headlight relay set up. I have that on 3 of my trucks and think it is a worthy addition since my stock wiring hasn’t started smoking or melting.

I guess you could run 24 volts through the headlight side of the relays. But, why? 12 volts through lights are available just about anywhere and as already pointed out. LED versions are excellent for vision and long lasting.

It is your truck, so do as you wish.

 

[motormayhem]

Yea I'll just stick with 12V for now if there isn't an easy replacement.

 

[MarkM]

A lot of new LEDs will run from 10v to 30v without issue. Makes life a lot easier.

Mark

 

[79Vette]

12v sealed beams you can easily replace at any parts store with a relay harness is the way.

The relay harness is easy to put together, lots of write ups on the Internet how to do it. Or you can buy one for cheap. Either way it's definitely worth it

 

[motormayhem]

12v sealed beams you can easily replace at any parts store with a relay harness is the way.

The relay harness is easy to put together, lots of write ups on the Internet how to do it. Or you can buy one for cheap. Either way it's definitely worth it

That what I did.