• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Air line leak / repair ?

Bob H

Well-known member
3,148
167
63
Location
Huron National Forest, Michigan USA
Have an air leak under the dash, thought it was the line to the gauge , and it just needed tightening. Well it isn't the connection, it is a cut in the hose, which had a piece of aluminum wrapped around it, this piece of aluminum was manufactured and not a rig job. Is that a typical repair? or just a protective band that is supposed to keep a rubber hose from getting cut, and somebody at the motor pool used it as a 'non-regulation repair.

I would just assume replace the rubber air line, I misplaced my cd manual, so I can't look up the part#, Where can I get one?
 

Wolf.Dose

Active member
1,062
10
38
Location
Boehl-Iggelheim, Germany
Some tape is not a professional repair. As said, go to your Diesel shop or hydraulics shop and get a new one made. Do not rely on 40 year old stock parts, if you can get a new one for relatively small money!
Wolf
 

Bob H

Well-known member
3,148
167
63
Location
Huron National Forest, Michigan USA
Yes, I know I can have one made up, and I have the tools and knowledge to make my own.

But I am a sucker for OEM parts, and would like to use the correct replacement if I can find it,

I thought this band over the cut was odd at best, maybe it was just an ID tag that was slipped over the leak :|.
 
Top