• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Air line leak / repair ?

Bob H

Well-known member
3,145
162
63
Location
Huron National Forest, Michigan USA
Have an air leak under the dash, thought it was the line to the gauge , and it just needed tightening. Well it isn't the connection, it is a cut in the hose, which had a piece of aluminum wrapped around it, this piece of aluminum was manufactured and not a rig job. Is that a typical repair? or just a protective band that is supposed to keep a rubber hose from getting cut, and somebody at the motor pool used it as a 'non-regulation repair.

I would just assume replace the rubber air line, I misplaced my cd manual, so I can't look up the part#, Where can I get one?
 

Wolf.Dose

Active member
1,062
9
38
Location
Boehl-Iggelheim, Germany
Some tape is not a professional repair. As said, go to your Diesel shop or hydraulics shop and get a new one made. Do not rely on 40 year old stock parts, if you can get a new one for relatively small money!
Wolf
 

Bob H

Well-known member
3,145
162
63
Location
Huron National Forest, Michigan USA
Yes, I know I can have one made up, and I have the tools and knowledge to make my own.

But I am a sucker for OEM parts, and would like to use the correct replacement if I can find it,

I thought this band over the cut was odd at best, maybe it was just an ID tag that was slipped over the leak :|.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks