- 3,224
- 398
- 83
- Location
- Tonopah, AZ
$11,600 WOW!!!
I took some pics of it so I have something to compare to.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Barstow M936's recovery
- Thread starter M35A2-AZ
- Start date
I took some pics of it so I have something to compare to.
Old Lincoln County Iron
Member
- 490
- 5
- 18
- Location
- Carrizozo, NM
Thanks for the pics Albert . Are you planning on putting a vice back on the front of yours?
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
You are welcome, did not take that many.
Yes I plan to get a vice when I can find one.
MAJ MALFUNCTION
New member
- 38
- 0
- 0
- Location
- Edmond, OK
Albert,
Thanks very much for taking the time to look at my truck for me! I really appreciate it!
It's going to get delivered to our ranch tomorrow morning.
Thanks very much for taking the time to look at my truck for me! I really appreciate it!
It's going to get delivered to our ranch tomorrow morning.
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
You are welcome, sorry I could not do more of a preview. The GL guys were being a plain in the Bu%^.Albert,
Thanks very much for taking the time to look at my truck for me! I really appreciate it!
It's going to get delivered to our ranch tomorrow morning.
Hope you enjoy the truck it was a nice looking truck.
markmontana
New member
- 1,001
- 3
- 0
- Location
- Mesquite, NV/Layton, UT
Did they let you drive your car into the lot where the wreckers were?
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
Not until they got to the lot. We sat in my pickup outside the lot at the gate for over an hour. They do let you drive into the lot and park by your truck.
markmontana
New member
- 1,001
- 3
- 0
- Location
- Mesquite, NV/Layton, UT
I've always been able to drive into the lot -- until I picked up my 936. I drove in and the lot guy had a fit and made me drive out- park- and then walk in. I told him he was full of it and made a complaint.
Happy to know you can drive in again.
Happy to know you can drive in again.
Old Lincoln County Iron
Member
- 490
- 5
- 18
- Location
- Carrizozo, NM
Were you able to use they trucking company I referred you to or someone else?Albert,
Thanks very much for taking the time to look at my truck for me! I really appreciate it!
It's going to get delivered to our ranch tomorrow morning.
Old Lincoln County Iron
Member
- 490
- 5
- 18
- Location
- Carrizozo, NM
Not looking forward to the heat out there ( Phoenix) but I am getting real anxious to get out there!
Its like waiting for Christmas morning!!! Will let you all know ETA when I get on the road.
Its like waiting for Christmas morning!!! Will let you all know ETA when I get on the road.
- 1,964
- 217
- 63
- Location
- Arizona
Monday will be the hottest day for a while, too. High of 115, low of 92, no chance or rain. Whew...
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
Well that would suck!!! They are starting to be a pain for sure.
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
I got the key from markmontana and it did not work on my locks on the truck. So I got the grinder out and cut them off and Ya!!! Goodies!!!
No tow bar, feet or axle clamps, but lots of other things.
No tow bar, feet or axle clamps, but lots of other things.
Attachments
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
No tow bar, but a slave cable. And most importantly, it came with that hard-to-find whiffletree bar! I'd say you did just fine!
groundog
New member
- 375
- 0
- 0
- Location
- wittmann,az
CONGRATULATIONS--LOTS OF GOODIES
MAJ MALFUNCTION
New member
- 38
- 0
- 0
- Location
- Edmond, OK
Pretty good score!! 
MAJ MALFUNCTION
New member
- 38
- 0
- 0
- Location
- Edmond, OK
Albert,
Here's how my boxes looked, when I cracked 'em open (since you asked).
I have not done a 100% inventory, but it looks like the truck comes with everything it's supposed to have. It came out of rebuild with all of the tools/BII on board and never was issued/used.
Here's how my boxes looked, when I cracked 'em open (since you asked).
I have not done a 100% inventory, but it looks like the truck comes with everything it's supposed to have. It came out of rebuild with all of the tools/BII on board and never was issued/used.
Attachments
- 1,651
- 815
- 113
- Location
- Central NY
Majmalfunction Which locker is pic 3? Looks like the door swings down or out to the side not up like those for pic 1 and 2. Great haul - will save a bunch of searching headaches!
M35A2 - AZ Earlier pics - do I see two working 30ton bottle jacks? If so, want to cash one in? My 816 did came with 50% of the BII (no jack - but 2 whiffle trees!)
OOps - looked at pics and didn't realise two different posters. edited appropriately.
M35A2 - AZ Earlier pics - do I see two working 30ton bottle jacks? If so, want to cash one in? My 816 did came with 50% of the BII (no jack - but 2 whiffle trees!)
OOps - looked at pics and didn't realise two different posters. edited appropriately.
Last edited:
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
Nice!!!
MAJ MALFUNCTION
New member
- 38
- 0
- 0
- Location
- Edmond, OK
Zebedee,
That is the sponson box below the passenger side door. It swings open to the right (toward the front of the truck).
It had a cable tie locking it shut, when I took delivery of the truck. When I cut it off, the keys for all of the rest of the locks were in there (all the same SN lock)!
There is also a small sponson box on the back right corner of the truck that had some tools in it (forgot to take a pic of that one).