Battery disconnect?

[scabskunk]

The way i wired it up was to disconnect both 12v+ and 24v+ left negative hooked up

 

[ramdough]

The way i wired it up was to disconnect both 12v+ and 24v+ left negative hooked up

That is exactly what I was looking for. Thanks!


Sent from my iPhone using Tapatalk

 

[Reworked LMTV]

If you add another switch of the same, you can switch your NATO from 24 to 12 volts.

 

[ramdough]

The way i wired it up was to disconnect both 12v+ and 24v+ left negative hooked up

Just ordered my switch…. Will be in next week.

By any chance, do you know what size wire and lugs you used? I am not near my truck and want to Amazon my parts so it all arrives at the same time.

Thanks
Again!


Sent from my iPhone using Tapatalk

 

[Reworked LMTV]

2/0

 

[Reworked LMTV]

I used 3/8 or 5/16 lugs 2/0, depending on which bolt you are connecting to on a typical military battery terminals. I replaced a bunch of terminals, so you may want to double check your sizes.

 

[ramdough]

I used 3/8 or 5/16 lugs 2/0, depending on which bolt you are connecting to on a typical military battery terminals. I replaced a bunch of terminals, so you may want to double check your sizes.

Thanks! That helps. I will get supplies on order so I can get this done soon. I plan to do a lot of welding and wanted an easy kill switch.


Sent from my iPhone using Tapatalk