Cargo Floor Section

[revhrd]

Does anyone happen to have a section of the cargo floor that is able to part with it? On my M998 it came with the "upgraded" access panel for the fuel pump. But it was a hack job and I'd like to make it better. I know it's a long shot but I figured it's worth a try before looking elsewhere.

 

[Retiredwarhorses]

Does anyone happen to have a section of the cargo floor that is able to part with it? On my M998 it came with the "upgraded" access panel for the fuel pump. But it was a hack job and I'd like to make it better. I know it's a long shot but I figured it's worth a try before looking elsewhere.

It’s not for the fuel pump, it’s for the sending unit for the fuel gauge.

 

[TOBASH]

You can easily make that out of fiberglass or sheet aluminum flashing.

 

[country]

will this work?



HM-1025 | Floor Panel Cab Middle Section HMMWV
HMMWV Middle Floor Panel for HMMWV Variants
NSN #:
Price: $595.00


or this?



HM-1039 | HMMWV Rear Body Section With Ammo Box Brackets (#1)
HMMWV Rear Body Half With Ammo Box Brackets (#1)
NSN #:
Price: $675.00

 

[springer1981]

Here's a 24x24 section. https://midwestmilitaryequipment.com/panel-cargo-floor-painted-24x24/

 

[revhrd]

It’s not for the fuel pump, it’s for the sending unit for the fuel gauge.

Correct, at the time of posting this I had not looked at the parts manual. After a bit of research, I can see that the pump is inline. I had read about the filter sock here and jumped the gun into thinking that it was a typical in the fuel tank pump. Is there ever a reason to unbolt the rectangle cover? The current cutout, while not clean, does give me the ability to uninstall the sending unit.

 

[revhrd]

You can easily make that out of fiberglass or sheet aluminum flashing.

That's a possibility, I did find online vendors as another member pointed out that sell a 24" x 24" piece. It was more of a scrap piece a member may have laying around.

 

[revhrd]

will this work?



HM-1025 | Floor Panel Cab Middle Section HMMWV
HMMWV Middle Floor Panel for HMMWV Variants
NSN #:
Price: $595.00


or this?



HM-1039 | HMMWV Rear Body Section With Ammo Box Brackets (#1)
HMMWV Rear Body Half With Ammo Box Brackets (#1)
NSN #:
Price: $675.00

It would work, but they are much more than I would need. I appreciate the suggestion.

 

[revhrd]

Here's a 24x24 section. https://midwestmilitaryequipment.com/panel-cargo-floor-painted-24x24/

I saw that at a different place for $75. I appreciate the assistance.