- 14,639
- 4,818
- 113
- Location
- Buchanan, GA
Intercooler?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cranked the injection pump up, engine ran away on startup...
- Thread starter ajsmith184
- Start date
U1100L
Member
- 64
- 4
- 8
- Location
- littleton ma
If I say anything else no one knows what I'm talking about. I call the air to air charge the aftercooler but some people call that the intercooler. OK The bearing oil seal on the inside of the turbo. Subject up for debate, seen them labeled both ways in manuals...
- 14,639
- 4,818
- 113
- Location
- Buchanan, GA
We're talking about a 6.5 diesel. There's no intercooler/aftercooler, just straight from the turbo into the intake. Nor would an intercooler ever have oil. The oil seal can fail in a turbo and introduce oil into the intake path leading to a runaway. But there's no oil at all in an intercooler.
U1100L
Member
- 64
- 4
- 8
- Location
- littleton ma
Thank you for confirming from my first post. Sorry for the use of 2- syllible word. Dead topic for me.
WARWAG
Active member
- 1,487
- 22
- 38
Whats a Turbo?.................
- 4,210
- 37
- 0
- Location
- Las Cruces, NM
Any update? I was amazed at the start up checks they do to rebuilt motors in the TM's. . . .
nyoffroad
Well-known member
- 942
- 690
- 93
- Location
- Rochester NY
well then maybe it's the afterburner??
I know a leaky seal can keep the engine running but to take off and max out the RPM's just that quick? I'd have to check and see if it even had a seal!I've gotten pretty stupid with 6.2s in the past and I've never.... lets just say they've held up VERY well, doubt you did any damage but keep us updated