CUCV Parts to Aberdeen

[HAWKMAN]

I'm starting the process of selecting and packing for Aberdeen. If anyone needs something in perticular for their 1008/1009 please let me know so it will have a space in the van........a very PACKED van see you all there!!!

 

[AllenEM]

I need a complete tail gate for my M1009 but I'm in Oklahoma.

 

[rfischba1]

I could use a working IP pump for the 6.2 engine.

 

[HAWKMAN]

I could use a working IP pump for the 6.2 engine.

Unfortunately I don't have any tested IP units, I will be bringing an IP from an engine that was apart when the truck came in......selling it as a ???????

 

[CUCVFAN]

How about a passenger vent window assembly? Any M1009 tailgate crank handle assemblies?

 

[HAWKMAN]

No problem on the vent assy I will bring a couple as well as a couple aftermarket outside crank handles to cover the guys that need something right away. I'm also going to bring a set of rears, if anyone needs a spare I'll sell for a good price.

 

[D8dave]

What about a tranny for a pickup i need a 400 tubo

 

[LanceRobson]

Looking for a clean driver side door to replace one with major forklift damage. Also looking for a clean dash pad.

Lance

 

[HAWKMAN]

What about a tranny for a pickup i need a 400 tubo

Your in luck! I just tore down a truck for the engine yesterday, trans couldn't be easier to pull!, $200.00, unit is guaranted. Let me know

 

[HAWKMAN]

Looking for a clean driver side door to replace one with major forklift damage. Also looking for a clean dash pad.

Lance

No luck on the dashpad...would a door shell,(no guts/glass [use yours]) be OK?

 

[OLDCHEV4X4]

Any M1009 wheels? How much? And of course the M116 tarp.

 

[HAWKMAN]

How many wheels do you need? I'll definately remember the tarp

 

[Tanner]

CUCV 24V starter available?

'Tanner'

 

[OLDCHEV4X4]

How many wheels do you need? I'll definately remember the tarp

4 wheels

 

[acmunro]

I'm looking for 3 or 4 sets of the tubes where the shackles mount. Don't need the shackles just the tubes where they mount. I would like to set up some of my non MV trucks so I can use my MV Towbar. How many do you have and price ?
Thanks

 

[m38inmaine]

Allen, I have one pair I can send toward the parts you are getting for me, I'm sure Hawkman can supply the rest.

 

[HAWKMAN]

I'm looking for 3 or 4 sets of the tubes where the shackles mount. Don't need the shackles just the tubes where they mount. I would like to set up some of my non MV trucks so I can use my MV Towbar. How many do you have and price ?
Thanks

I can hook you up with three sets, these are everthing on the frame, brackets, re-enforcing plate and some still have the bolts as I just cut the end on the frame off to keep it complete. $50.00 a pair so three sets are $150.00
let me know if your interested. Thanks

 

[HAWKMAN]

4 wheels

Found two and are ISO for two more.....I'll let you know

 

[CUCVFAN]

If HAWKMAN can't find any more, I'll have two available.

HAWKMAN, If you have any extra complete front shackle mounts I'll take a pair as well.

 

[acmunro]

shackle mounts

If you only have three sets, I'll take two and CUCVFAN can buy the third set. Or if you have more I will take more. Thanks, Al