• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce crank pulley wobble/loose

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,531
113
Location
Camp Wood/LC, TX
Got a multifuel deuce in and crank pulley/harmonic balancer totally loose. For anyone that has run into this before, is this a busted crankshaft? Before I tear into it just wondering.
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,531
113
Location
Camp Wood/LC, TX
Funny story on this. My shop is right near a property with bee hive boxes. On Sunday when I was going to work on the truck, I noticed beekeepers removing the boxes. No big deal I thought until I started draining the radiator and was ATTACKED by pissed off BEES and bitten 5 times ouch. Needless to say I pulled the plug on the ops.
 

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,986
2,523
113
Location
Montevideo/Uruguay
Got a multifuel deuce in and crank pulley/harmonic balancer totally loose
Same happened to me, once - with a "condition unknown - ran when parked" 5-ton LDS. (Complete engine sitting in its crate; all accessories there and looking nice and clean... for $200, so I jumped on it...)
Short story: crankshaft was broken, right in between the front main journal and the 1st crank-pin journal. Who could tell...

Funny thing is, it was discovered only after the motor was installed and fired up, first time. It ran smooth on all six, with everything moving normally - except for the pulley which had that erratic wobble... obviously.

In your case I would do a thorough "pry-bar-mode" inspection, before anything.
 

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,256
3,355
113
Location
NORTH (Canada)
It ran smooth on all six, with everything moving normally - except for the pulley which had that erratic wobble... obviously.
:oops: That would be such a disappointment! Awesome engine design though, to even run with a broken crank. NDT, I think I know where to find a OEM LDS crankshaft if needed.
 
  • Like
Reactions: NDT
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks