• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Electrical Port

135gmc

New member
307
0
0
Location
St Paul/MN
That is for slave starting either your truck, or some one elses truck.. The older slave cables were 2-pin, with them being side by side. They weren't offset from the centerline by much, so it was possible to stuff the connector in with reversed polarity if you really worked at it. The NATO design is coaxial - there in a center pin with an outer sleeve. If you have to cross over between truck generations, there is an adapter from the 2-pin to the NATO connector.
 

eagle4g63

Well-known member
1,544
34
48
Location
North/west Indiana
It's for your "fry dady"....it is close to the gas tank so when you are done you can pour the oil in the tank and keep driving(with a nice hot fried lunch!!):mrgreen:
 
Top