tlarkin530
New member
- 8
- 0
- 0
- Location
- Phoenixville, PA
What is the purpose of the heavy duty electrical port (looks somewhat similar to 220v) on the right side of the cab?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Electrical Port
- Thread starter tlarkin530
- Start date
- 1,964
- 295
- 83
- Location
- Colchester, VT
Slave cable receptacle.
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
Its for heating your lunch. (serioulsy, look it up 
)
)
135gmc
New member
- 307
- 0
- 0
- Location
- St Paul/MN
That is for slave starting either your truck, or some one elses truck.. The older slave cables were 2-pin, with them being side by side. They weren't offset from the centerline by much, so it was possible to stuff the connector in with reversed polarity if you really worked at it. The NATO design is coaxial - there in a center pin with an outer sleeve. If you have to cross over between truck generations, there is an adapter from the 2-pin to the NATO connector.
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
In the Resources Tab under the Steel Soldiers Banner, you can download the TM's to become more familiar with your truck. Welcome to the Forum.
JAYHAWK 1962
New member
- 706
- 0
- 0
- Location
- tijeras, nm
i have the bag and cable for heating up your lunch from the receptacle.
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
I knew someone would get it. 
Jayhawk
Jayhawk
- 9,580
- 218
- 63
- Location
- Dickson,TN
All this time I thought it was to hook up a espresso machine.
eagle4g63
Well-known member
- 1,544
- 34
- 48
- Location
- North/west Indiana
It's for your "fry dady"....it is close to the gas tank so when you are done you can pour the oil in the tank and keep driving(with a nice hot fried lunch!!)