Findlay2012 Swap list

[319]

If anybody has some DOT 5 brake fluid, i need some.

How much do you want? I buy it by the quart at a parts store on Maple Rd.

 

[camp9]

I still have those 5ton multi fuel transmissions rebuilt in crates. would trade for a 813 transmission or sell outright.

 

[13 MIKE]

How much do you want? I buy it by the quart at a parts store on Maple Rd.

Some, i'm tired of paying retail. Kip is bringing me some i think.

Should be there around 3 or 4 Friday.

 

[kipman]

Mike, if Eric has some, buy his, that will save me a trip to the farm.

 

[13 MIKE]

Ok, see ya.

 

[cjcottrill]

Still have this, any interest?

 

[Chevracer87]

Does anyone have a couple sets of Deuce door hinges they could bring. The replacement's I bought didn't work out so well. Possibly a door as well.

 

[JeffAS]

24V lights

I am going up Friday, I can bring some 24V lights sale or trade $15 for two

 

[citizensoldier]

What's your price on those lights Jeff?

 

[gimpyrobb]

So I am going to be crunched for time. What am I bringing for who? I am making a list!

tires- Lane
headgaskets- Mike
BII lug tool- I forget
Stock fuel pump- I forget
20mm cans- Dennis (how many?)
Flares for Kenny
Hinges- chevracer
filters filters filters!

 

[WW2Chevy]

Anyone coming from or through Boyertown PA to Findlay?? Have a small haul in mind if someone is... (front seats for an '84 z28 ). Happy to contribute to someones "fuel fund"...

 

[Wildchild467]

does anybody have the door hinge bolts for a deuce with west coast mirrors? they are 1/2" hex on the top and 1/4-28 on the threads. PM me if you do please and thank you!

 

[kipman]

I found 10 new fiberglass uprights for a deuce, good time to replace your old wooden ones, 75.00 for all ten.

 

[docfarmall]

Pulling out in morning
2 med duty tow bars
1 smaller one
1 armored light for someone
20 cal boxes
30 cal
40 cal
bdu's
boots of all sorts
boonie hats
truck parts
duece pto
m 38 winch pto shafts
trioxine
m 880 towbar mounts
deuce fuel tank
tent stoves
multi fuel burners
snatchem blocks
antennia's no scoops or mounts
jumper cable ends
mil cargo straps
slave cables
rut sacks
loooooooong hydralic hoses and some short ones too
jerry cans
donkey thing amabobbers
speed wrenches
105 pigtails
pair of deuce doors
m37 troop jump seats
m37 jerry can mount
jerry can mounts
tripods for jerry cans or water cans
2 ground rods with slide hammers
full set of wood for m37 troop seats and bows
some other m37 parts
axle clamps for towbar got one set on truck got a couple more if ya needsem
got canvas stretchers and mesh ones too
some tank lights
deuce steering box and coloum
Dang my finageres hurt
See it want it reseve it call 812 571 2137
m 105 bows (brandie new)
m 105 front rack

 

[islandguydon]

I am going up Friday, I can bring some 24V lights sale or trade $15 for two

Kip/Gimp, can you pick me up 4 of the 24v lights..? $30.00 is a steal.

 

[Stretch44875]

I've decided to sell the Mighty-mite m422a. Will be bringing it in Thursday night, leaving Saturday morning.

Not sure on price, but it will be under 2,000. Just not sure how much under yet. Mostly complete, motor in unknown condition. I would assume it needs rebuilt, but maybe not. No title. Body is decent, lots of new and used parts. Just don't have time for it.

Really neat and rare vehicle for the right person.

Dennis

 

[still standing still cyco]

Unfortunately I won't be able to make this show, but if anyone is looking for any of the ambulance box equip for an M1010, I have a lot of the accessories to get rid of, including the gurneys with pads and mounting brackets, and I'd be willing to sell the a/c, heater, and driver side bench (possibly the passenger side bench also once I sell the heater). I'll also be selling the two 24v alternators in the near future after I switch to 12v, and have them tested. I live in the Akron area, PM me if your looking for any of these. Thanx, and everyone have a great time there!! Ryan

 

[still standing still cyco]

Doc, do you still have any of the M200? trailer leaf springs that you used to lift your M1010?

 

[docfarmall]

I sure dont we sent them to China several months ago sorry .
m105 bows (new)

 

[still standing still cyco]

Oh well, no big deal. Just figd I'd check. They working out ok since you've put some miles on them? Have you run into any kind of issues with that setup?