FM100 Spin on fuel filter

[Cory1337]

I purchased the fm100 kit from Napa.
Filter/ base # 4913
Primer pump #4921
Settling bowl #4924
5 micron filter #600159

As a warning the filter that comes with the 4913 base from Napa is a 150 micron filter. I was unable to find the base with a 5 micron filter from Napa.

Used some 1in square tubing to space the filter away from the firewall, bolt holes lined up great. If I were to do it again I think I would like to add a pressure gauge fore and aft the filter to gauge how often it needs changed.

 

[Honest Bob]

How much did that primer help with bleeding the air out of the fuel system?

 

[Cory1337]

How much did that primer help with bleeding the air out of the fuel system?

Works great. It saves a lot of cranking to get fuel flowing. I do still unplug the red wire and do a 5 second crank, plug in red wire and she starts right up. Really worked get when I replaced the rubber lines by the fuel tank. Was able to prime up to the filter and she fired right up.