wilber
Member
- 149
- 24
- 18
- Location
- olathe kansas
Looks nice.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Just Bobbed the Deuce
- Thread starter Jimma
- Start date
ZZHD
New member
- 17
- 0
- 0
- Location
- allenton/wisconsin
Look's good. Did you use deuce front springs? Alot gets done when you are prepared for the job.
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
You ought to see it in person.
It looks REAL good.
I started bobbing mine yesterday ... Jim was kind enough to let me come up Saturday and get a look at it before he put the bed on ... and to answer questions ... and let me make a couple measurements.
He gave me his whole morning ... and STILL got his little girl to a friends birthday party on time. I HOPE!
Thanks again Jim!
oddshot
unispeed
Member
- 83
- 2
- 8
- Location
- Akron Ohio
Looks Nice!
Jimma
Active member
- 1,281
- 3
- 38
- Location
- Hartwell, GA
I took a drive shaft I had lengthened 5" when I went. I took the springs from a duece and a new set of U bolts from memphis equipment with me. Joe was ready and we got to work. If anyone is in the south east and wants to bob a duece and get it done quickly, affordably and with quality precision blythewoodjoe is the guy. He does this for a hobby not a living. He is an accomplished pipefitter, welder and fabricator.
1crook
Member
- 221
- 0
- 16
- Location
- Bethlehem, GA
I don't know why they let Clinto still attend. Nice avatar Gimpy.
Truck looks good Jim. Joe is a good guy, always willing to lend a hand.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,133
- 113
- Location
- Athens, Ga.
Zack
New member
- 59
- 0
- 0
- Location
- Evans Georgia
Jim where did you get your Tires.. I am going to get my truck tomorro. and i want to put 395s on it.
Jimma
Active member
- 1,281
- 3
- 38
- Location
- Hartwell, GA
Well this weekend I got it inside during the rain and changed out all the fuel filters and put on new front shocks. I thought it could use a new set and it did. The old ones after removal were determined to be completely shot. I now know for sure looks are not everyting especially with shocks. They looked good but were shot. I am ordering my 383 green paint tommarow from RAPCO.