• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1070 recovery

Status
Not open for further replies.

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,318
3,208
113
Location
Fort Worth, Texas
ke5eua is on the road as of an hour ago (just got home myself). Rain was heavy just after departure just north of where the HET was but let up after 20 mins. I'm holding the M818 until his return..just take Murphy with you when you do lol!
 

Attachments

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
ke5eua is on the road as of an hour ago (just got home myself). Rain was heavy just after departure just north of where the HET was but let up after 20 mins. I'm holding the M818 until his return..just take Murphy with you when you do lol!
Thank you so much.

I think Murphy is clinging to the rear bumper.

Stopped for the night in Baytown, raining so I figured I'll get a good night sleep in the 1070.

Hopefully Murphy decided to take a break for a few days and let me finish this trip.

I just want to say thank you to all who have offered assistance, without you I would probably have incurred a hefty tow bill somewhere down the line.

I am grateful, and if I can return the favor if ever called upon.

On a side note, anyone selling a medium duty tow bay, feet not needed, lol

Myself I would like to get an ibes one, but I owe jeep a medium duty one.

So from here it is on to jeeps then i10 to Florida, so if you are along the route please be on the lookout.

Sorry I didn't toot the horn, between the rain and crazy drivers wasn't paying attention to mile markers.
 
Last edited:

NDT

Well-known member
Steel Soldiers Supporter
10,501
6,631
113
Location
Camp Wood/LC, TX
I recommend Baytown Seafood at I-10 and Hwy 146, south side of the intersection next to truck stop.
 

NDT

Well-known member
Steel Soldiers Supporter
10,501
6,631
113
Location
Camp Wood/LC, TX
Ok, looking for our day 9 update. You didn't let one of the lot lizards into the cab last night did you?
 

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
Ok, looking for our day 9 update. You didn't let one of the lot lizards into the cab last night did you?
Ha ha, the wife would feel a disturbance in the for if I pulled up a xxx site on my phone, so uhh no.


Night was peaceful, after I topped off this morning I realized Murphy will not let go, I must have feed it after midnight or he got wet from all the rain.

Battery gauge on the 24v side was in the red again. I shut off the ventaliator and the dash fan and it had maintained 24v.

I'm hoping it's not a battery but more of a alternator issue. Gonna put the multimeter on it in a little bit to see what the voltage is on it.

Other than that picked up the 939 for jeep and on my way. Should be in fl by morning, wife is going to meet me in ft Myers Friday then we head back to la.
 

NDT

Well-known member
Steel Soldiers Supporter
10,501
6,631
113
Location
Camp Wood/LC, TX
The -20 says 24V is only used for starting, ctis, air dryers, and trailer lights. If you pop the breakers on those items, the batt should stay charged enough to crank for days to come. Knock on wood.
 
Status
Not open for further replies.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks