-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M108 deuce wrecker engine swap
- Thread starter SETOYOTA
- Start date
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Did you have a hard time welding up the holes in the top due to the rust? The reason I'm asking is that I have some significant rust on a truck I just got that has perforations thru the metal in spots in the hardtop sides.
The parts look like new money when you repaint ones that were sandblasted clean.
- 2,069
- 3,019
- 113
- Location
- Florence, SC
Subscribed!
- 3,262
- 3,382
- 113
- Location
- NORTH (Canada)
Given the production dates of these cranes, I find it truly amazing that stuff like this still pops up. Are all of these hoses easily changeable once the truck is fully assembled? What I am gett ing at is that, if there is a hose that would be a real PITA to change, that is the one that one might consider having re-made from current new hose, using the old connectors if needed.
Once I get to the crane I will inspect and replace what is needed. These hoses I found are 5 years old. A Napa store had the old hose ends in stock and made them for the previous owner. Actually he had 2 complete sets made but when he sold the m62 most went with the truck.
Finally a little more work on the m108. Got the truck running with the fuel and airlines hooked up and the cooling system functional. It moves on it’s own.
https://youtu.be/WzeQz3C-ojU
https://youtu.be/WzeQz3C-ojU
Last edited:
- 3,262
- 3,382
- 113
- Location
- NORTH (Canada)
Congrats! It is such a rewarding feeling when the lump starts up for the first time and runs as if it had never stopped. Good job!
I am still psychologically damaged from my first ever multi rebuild/refresh and in the back of my head expect it to go into some kind of self destruct sequence whenever I start it up.
And, for the record, I am not at all envious of the work space you appear to be enjoying. Not one bit.
I am still psychologically damaged from my first ever multi rebuild/refresh and in the back of my head expect it to go into some kind of self destruct sequence whenever I start it up.
And, for the record, I am not at all envious of the work space you appear to be enjoying. Not one bit.
To be honest I still think the whole thing will grenade itself at any moment. I definitely couldn’t have gotten this far without some help from knowledgeable friends . While to some this may be a weekend project for me this has been a huge task . I had never attempted anything similar but I keep plugging along. So far not bad for a guy with no experience and bunch of harbor freight and craftsman tools.
My latest issue is I think I maybe blew the regulator on the fire wall. The truck built air to 90psi but then the regulator started leaking. Will need to investigate further .
next on the list is to get the brakes up and start to clean and paint the cab interior .
My latest issue is I think I maybe blew the regulator on the fire wall. The truck built air to 90psi but then the regulator started leaking. Will need to investigate further .
next on the list is to get the brakes up and start to clean and paint the cab interior .
Last edited:
Interior of cab sanded and painted. Installed a new drivers seat. Believe it came out of a m923. Picked it up at a flee market for cheap. If anyone installs one of these seats you will need to drill the seat base holes to match the mounting points in the m44 series cab. The bases are the same size but none of the holes line up.
The seat was wet in the pic
The seat was wet in the pic
Attachments
Those parts look familiar. Sandblasting them makes them look new when painted. Looking good.
Eddie