-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M916 to MRAP / HET build thread
- Thread starter Jeep Nasty
- Start date
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
So I replaced all the air lines while I had easy access to them. I built a custom bracket and welded it in that will be the pivot point for the subframe. I got the subframe started. I need to plan out airbags and brackets. Once I get some of the rungs in on the ladder frame, I can get the new cab on to mount and space it then it will be time to frame the skeleton of the MRAP body.
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Sub-frame is complete, air bag mounts are done and air bags installed, track bar bracket is built, floor is laying on the deck (has to be notched for the upright supports. We are now going vertical. If I can find some free time, this part of the skeleton should go up pretty fast. Then I order the steel for the walls and get the wiring harness figures our and get the truck running, then plumb in all the airlines.
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
- 3,752
- 1,529
- 113
- Location
- North Carolina - FINALLY !
Chris will there be some sort of "centering" bar (like a panhard) in the rear of the bed? Any side-to-side movement could put enormous strain on the front hinge.
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Yes there is a large track bar to prevent side to side movement.
it's mounted off of one of the frame supports to the subframe I don't think I took any pictures of before I put the floor down.
Here are a couple pictures of the mounts for the track bar.
Sent from my iPhone using Tapatalk
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Sent from my iPhone using Tapatalk
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
Your the man! Holy cow this build is incredible.
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Last edited:
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Last edited:
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Sent from my iPhone using Tapatalk
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
dude you rock! Cant wait to see the outcome.
av8or
Member
- 352
- 4
- 18
- Location
- fort denaud, florida
Looks great, Like everyone else can't wait to see more pictures of progress!
Jeep Nasty
Active member
- 379
- 244
- 43
- Location
- NH
Sent from my iPhone using Tapatalk