- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
I have 2 M929A2's and want to put larger tires on rear. Any ideas?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M929A2 Dump wanting wider tires on Rear
- Thread starter ladoublet
- Start date
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
What type spacer would you need to dual 14.00's
- 6,069
- 4,430
- 113
Bridge truck wheels. And tubes. And know you'd be overwidth.
You actually missed a good deal about 2 weeks ago. About 7 M812 bridge trucks sold in Arkansas for cheap. They had all the hardware to run them with tubes.
You cut the face of a 22.5 wheel off and weld it to the rear side of the combat wheel.
I've even seen triple wides
Or put tracks on it over the dual rear tires.
You cut the face of a 22.5 wheel off and weld it to the rear side of the combat wheel.
I've even seen triple wides
Or put tracks on it over the dual rear tires.
Attachments
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
These are R20's. How do you tighten the inside wheel lug nuts if you weld a R20 face on the outside of the inner wheel rim?
- 6,069
- 4,430
- 113
Budd nuts, with no lugnut between the rear duals.
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
I still don’t understand
- 6,069
- 4,430
- 113
From inside to outside-
Wheelstud, inner wheel, thimble, outer wheel, outer lugnut.
Wheelstud, inner wheel, thimble, outer wheel, outer lugnut.
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
Thimble - my bad
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
Do I need longer lug bolts? Bear with me- 77 years old.
- 6,069
- 4,430
- 113
Attachments
- 6,069
- 4,430
- 113
Wheelstuds are the same...
FWIW, I don't think you really want to pursue double 14.00's. The overwidth PITA....
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
Will be off-road only
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
I'm still not sure about the thimble and how large it is. Is it home made from flat steel and iron pipe?
- 6,069
- 4,430
- 113
No, it is the normal way rear duals are mounted. It fits on a standard wheel stud, then an oversized lug nut goes onto the thimble.
- 246
- 943
- 93
- Location
- Eagle Twp, MI
@ladoublet
A thimble is the type of lug nut used on the inner dual wheels of Budd-style rims. It is tightened with a square socket (13/16"). They should be available at any heavy-duty truck parts or commericial tire shop.
The thimble is threaded on the inside to accept the wheel stud and tighten the inner wheel to the truck. It is also threaded on the outside to accept the lug nut that secures the outer rim/tire to the truck. (see picture below)
So you mount the inner tire/wheel on the truck using the thimbles to secure the inner wheel to the truck. Then mount the outer tire/wheel on the truck (the tightened thimbles will fit through the holes in the outer wheel) and use lug nuts to secure the outer wheel on the truck using the outside threads on the thimble nuts.
Thimble:
Here is my 5-ton during an outer-tire change with only the inner dual wheel held on with the thimbles. The outer wheel goes on OVER the thimbles and is secured with the outer lug nuts threaded onto the thimbles:
A thimble is the type of lug nut used on the inner dual wheels of Budd-style rims. It is tightened with a square socket (13/16"). They should be available at any heavy-duty truck parts or commericial tire shop.
The thimble is threaded on the inside to accept the wheel stud and tighten the inner wheel to the truck. It is also threaded on the outside to accept the lug nut that secures the outer rim/tire to the truck. (see picture below)
So you mount the inner tire/wheel on the truck using the thimbles to secure the inner wheel to the truck. Then mount the outer tire/wheel on the truck (the tightened thimbles will fit through the holes in the outer wheel) and use lug nuts to secure the outer wheel on the truck using the outside threads on the thimble nuts.
Thimble:
Here is my 5-ton during an outer-tire change with only the inner dual wheel held on with the thimbles. The outer wheel goes on OVER the thimbles and is secured with the outer lug nuts threaded onto the thimbles:
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
Are they available for the m929A2
- 84
- 12
- 8
- Location
- Natchitoches, Louisiana
Thank you. I was about to give up on dualling the 14.00R20's. I am assuming that you have 14.00R20's on the truck in the picture.
- 6,069
- 4,430
- 113
He has 11.00R20s on the truck in the picture.
The budd dual lug nut set up is available for M929A2. In fact, you'll probably find someone who took them off an A0 or A1 truck that would let you have them cheap or free.